Yin Yang Square Founder Construction

Steps/methods

The picture shows Yin Yang corner line

1. Vertical lines are laid at each vertical yin and yang corner to deal with spring lines, and a parallel line parallel to the vertical line of the yin and yang angles is placed on the 500mm sides of the vertical line of the yin and yang angles. This line is defined as " Yin Yang angle standard line."

The picture shows the corner of Yin Yang

2, the wall before the scraping wall lining with plaster plaster on both sides of the yin and yang angle within 500mm leveling, leveling to 2 meters by the vertical direction of the detection error does not exceed 2mm as the standard. Yinyang angle to the other side of the brush with plaster or wall lining to find smooth.

The picture shows the baseboard leveling

Precautions
1. Put the vertical line before the yin and yang angle leveling, check the flatness of the wall at the corner of yin and yang according to the vertical line, the error should be leveled with a wall lining within 5mm, the error must be leveled with gypsum if the error exceeds 5mm;

2. When the yin and yang angles are straightened, the flatness on both sides of the wall must be within 50cm. The flatness of 50cm is perpendicular to the wall surface. The error is not more than 3mm with the 2m ruler. The vertical direction of the yin and yang angle is 2m. The check error does not exceed 2mm).

Tool/material yin and yang angle, mason, painter, putty.

Decoration construction knowledge three trees paint paint

Stainless Steel Pipe/Tube

Stainless Steel Pipe,Stainless Steel Tube,Seamless Stainless Steel Pipe

Wanlei Steel Pipe Co., Ltd. , http://www.tjsteelpipes.com