Squatting pans are generally used in many places where there are public bathrooms in the home. To know that using a squat toilet does not occupy space, it is relatively clean, so it is also widely used in home life. The following small series of squatting toilet flush tank to choose the size of the right size and there are several types of squatting pan.
How to choose the size of the squatting pan flush tank
1. The squatting pan water tank is an indispensable equipment in modern sanitary ware. There are many types of squatting pans in this category. For example, they are divided into high and low water tanks by type. If you want to press the installation method is divided into: wall-mounted, sit box type, hidden type. According to the material can be divided into ceramic water tanks and fiberglass tanks. The size of the squatting tank, then only in accordance with the low water tank, for example, its inlet hole diameter is generally 25mm or 29mm, the diameter of the drainage hole is 65mm or 81mm.
2. The vertical distance from the effective working water level of the squatting pan to the overflow should not exceed 38mm; the critical level of the inlet valve should be higher than the overflow level, then its vertical distance should not be less than 25mm; Squatting tank gravity The lowest position of the non-sealing port of the water installation should be higher than the overflow level, and the vertical distance should not be less than 5mm.
There are several types of squat toilets
1, split body squatting pan
Split and split squatting pans are also classified according to their own traps. Split squatting device: The squat toilet itself is generally without a trap. It is separated from the trap. It is called a split squat toilet. The split squat toilet will be convenient to install, with large water flow and sufficient impact force. The deficiencies are harder to clean, and it's harder to get out if something falls. In addition, if the sanitary plumbing does not have its own drainage curve, then the sewer odor is prone to flooding. Siamese squatting device: The squat toilet has its own trap, which is called a one-piece squat toilet. One of the biggest advantages of the Siamese squat toilet is the ability to use the trap bends. This can create a “water seal†that prevents sewer odors from flowing backwards. The disadvantage is that compared with split squatting pans, conjoined squatting pans are prone to clogging, and it is difficult to clear them up.
2, front retaining and without front squatting toilet
This classification is generally based on appearance. At present, the squatting pan without front water is relatively simple and elegant, and it is relatively common to apply it. And with the front retaining, this is also able to better maintain the cleanliness of the ground near the toilet. When purchasing, the main point is whether the owner needs to stop the water.
3, front drainage and rear drainage squatting pan
Then this is based on the way of launching water. Bathrooms generally have reserved a sewage outlet. Squatting pans are called the front drainage squatting pans near the sewage outlets. Then the rear drainage squatting pans are opened in the opposite direction of the front drainage. There is no difference between the advantages and disadvantages. When purchasing, then you can choose according to your own pit distance. Generally, if the pit distance is relatively short, you need to select the drainage before.
Summary: There are several types of content related to the size of the squeezable flush tank, and there are several types of squeezing devices introduced. You must first measure the squat toilet flush tank before you know which size you should choose. Appropriate, hope the above introduction is helpful to everyone.
Stereo Microscope,Stereo Microscopes With Large Base,Zoom Stereo Microscopes,Binocular Stereo Microscopes
Ningbo Huaguang Precision Instrument Co., Ltd. , https://www.hgopt.com