Key self-adhesive magnetic lock - lock upgrade
Project characteristics: It is the use of two magnets with polar planes to accurately align with each other; the strong magnetic force of the opposite phase; the ability to penetrate a certain thickness and the magnetizable material can do work; and the magnetic force that never fails In order to drive the energy of the component, a lock can be hidden in the protective layer of the lock; it is the core component of the magnetic lock; it is a configuration for upgrading the lock.
The lock cylinder of the lock head controls the drive operating mechanism in the lock body, and the lock cylinder is controlled by the displacement state with all the lock pins of the same polarity. The polarity (key code) of each magnet in the key drives the displacement (lock code) of the corresponding lock pin. When the (pair code) is correct, the lock core is in an active state, and the lock body transmission mechanism is also in a lockable unlocking state.
('Lock code'. 'Key code'.
'Pair code' is the technical terminology of this article. Take the pin lock as an example: the pin that locks the lock core is the 'lock code', and the concave position of the pin on the top of the key is the 'key code'. When the key is inserted into the lock cylinder, the top support pin is 'pair code'. , and the lock cylinder can be rotated to 'correct for the code')
The advanced nature of magnetic locks:
1. The anti-theft performance has improved dramatically - the lock is hidden in the protective layer of the lock, no exposed parts, and no holes leading to the lock.
Under the multiple protection of the lock pin, it is difficult to spy on the displacement state (lock code) of the lock pin. The key is fully enclosed and the contactless password will not be revealed. It is difficult to technically unlock. At the same time, there is a great design space for designing locks in the ability to improve the anti-destructive unlocking.
2. Operation <Lock> is convenient and quick - the key is easy to enter. No need to twist, old people. Children. Blind people can use the lock smoothly.
3. Less faults - the lock head is dustproof. The ability of anti-corrosive substances is strong, and the components are slightly moving without loss, ensuring less failure.
4. It can be equipped with a key, unprecedented - the key can be made into an assembly kit, so that the locker can assemble it by referring to the original key password, or retrieve the lock password on the Internet with the lock number. Save the trouble of keying.
Reasons for the development of this project: All kinds of locks have been stolen by thieves and thieves, and the stolen goods have occurred frequently. The quality of locks is not good, and the anti-theft performance is poor. Another reason is that people's needs have spawned the unlocking service industry, and even with the development of various unlocking tools. Sales and unlocking experts have been promoting the quality of this industry, and its negative effect - for thieves to improve the way of committing crimes The door to convenience with technology. Although, good law and order can curb the occurrence of theft, but the crux of the problem is still on the issue of locks, the key is 'locking'.
The technical condition of the shallow lock <lock> can be known as the problem: the formation of the password - the technical relationship between the switch component (lock code) in the lock and the signal source (key code) of the start switch component on the key (pair code) ). The 'pair code' relationship between the 'lock code' and the 'key code' is set by the combination of the single lock and the key, which is the unique password of the lock.
The working principle of the lock: the 'correct information function' obtained in the 'key code' of the 'key code' and the 'correct code function' obtained by the 'lock code' is processed to the functional mechanism of the lock body: 1. The lock body mechanism must be in the correct information of the 'code pair' The function 'maintains work. 2.
After receiving the 'right code information function', the lock body mechanism also needs to receive the start signal to work. 3.
The lock mechanism is activated in the working state after receiving the 'correct information function'. The lock can be locked and unlocked.
The so-called technical unlocking: it is a tool that can generate the same signal as the lock 'key code', and sends a continuously changing 'key code' signal to the 'lock code' in the lock to find the 'pair code' in a short time. The correct 'information, use the 'correct information function for the code' method to open the lock.
It is more difficult to implement technical unlocking for the 1.2 working principle of the lock, but the design, manufacture and use are more complicated and troublesome.
Since the current 'correct code' information for most locks has been activated directly. The unlocking mechanism (the working principle of the lock 3). It is not difficult to explain the principle that the car remote control anti-theft lock is opened by the <decoder>: <decoder> continuously sends the 'key code' signal, and once the car lock receiver receives the signal of 'correct code', the switch circuit is turned on to make the lock The body mechanism opens the relay and the lock can be opened. Another example is the most commonly used marble lock, its lock cylinder and the components that block the rotation of the lock cylinder ('lock code') are exposed, using a toggle tool, a universal key, a high-intelligent electric unlocker, etc. to apply a continuous 'key code. 'Signal, if the lock core can be rotated, it is 'pair code' success ('key code' hits the 'lock code'. It requires certain technology and experience), and then it is unlocked.
The worst in all kinds of locks for the anti-destructive unlocking performance is the poor quality of the marble lock, due to rough processing. Inferior materials, the simplest tools such as 7-word screwdriver can be used. Cross screwdriver or even chewing gum can also put it turn on.
By the way, although <mechanical code lock> is more difficult to implement technical unlocking, it is necessary to prevent the information of 'correct code' from being invisible in the perfect situation of video recording equipment.
In summary, to make the <lock> have the best anti-theft performance, enough to make stealing thieves (not robbers) difficult to retreat, requires:
b. It is difficult to implement the means of using the device that continuously sends the 'key code' signal.
a hide the lock to enhance the lock's anti-destructive unlocking ability.
The c password and the 'correct code' information are not easy to leak.
This patent project belongs to the first working principle of the lock and can meet the above requirements. It is convenient and quick to use, and the cost performance is high. It is also hoped to reduce the incidence of burglary with safety equipment.
Feasibility of implementation: According to the market survey and data retrieval, no similar products or related materials (this project is being applied for patent protection in many countries in the world) have been found, and the number of new locks has entered the annual sales number. The billion-dollar lock market has a bright future.
The lock can replace the locks of various types of locks and can develop more new types of magnetic locks.
The drawing is a hand-made magnetron lock template (actually in good use): door lock, motorcycle lock, car steering wheel lock. All lock protection layers (shells) are made of 2mm thick stainless steel plates, which are completed in about 2-5 seconds by taking the key in the hand to lock the lock and open the door.
The lock head has a simple structure, the component is easy to process, the assembly is easy, the material is convenient, and the cost price is equivalent to the marble lock. All production plants in the lock industry have the ability to invest in technological transformation, and can produce the original lock varieties.
It is hoped that the engineers and technicians in the lock industry will study this information and strive for a win-win situation (transfer commission, ...).
I have more mature lock manufacturing materials and samples, and can be hand-made <single handle multi-function magnetic control door lock>, <circular magnetic lock lock door lock>, <car steering wheel magnetic lock>, <various Motorcycle magnetic control lock>etc. (actually used well), and a variety of magnetic control lock structure design information. VCD CD and lock model pictures, welcome to have the letter of intent to request.
Transfer conditions: configuration for the core components of the lock.
The transfer method must be contacted directly by email.
Address: No. 1, No. 1, Nanxian Main Street, Dajiangyuan, Xingang West Road, Haizhu District, Guangdong, China
Zip code: 510300
Name: Feng Laiyou Telephone (and fax) / 13622280676
E-mail: f. or Patent Type: Utility Model Legal Status: Authorized Patent No.: zl03274413.7
Method of transfer: general license exclusive license technology share
As manufacturer, we well know our products and we're here to tell you about the 1500w Led Grow Light. If you are a professional grower and need professional led grow light for hemp. We'd highly recommend you to check this 1500w grow light out.
This grow light 1500w is a very powerful lighting system designed to provide maximum light coverage for indoor plants, especially for marijuana. It features 12 light bars, applied with Samsung LEDs, true power 1500w. Full-spectrum design, greenhouse Grow Lights ensure a balanced spectrum of light for your plants, providing essential for plants growth. The adjustable light intensity and color temperature also allow you to customize the lighting environment for your plants. With RJ port and control capabilities, the 1500w full spectrum LED Grow Light is the perfect choice for greenhouses and commercial growing. It's ideal commercial led grow light.
1500W Led Grow Light For Plants,Led Grow Light For Hemp,Commercial Led Grow Light,Greenhouse Grow Lights
GuangDong One World High-tech Co., Ltd. , https://www.maksdep.com