Second, look at accessories: Hardware, steel lining, tops and other accessories is the key to the production of high-quality doors and windows, plastic steel doors and windows with insulating glass, the weight per square meter may exceed 40 kilograms, so the requirements for a variety of accessories is high. The quality of accessories varies from manufacturer to manufacturer, and prices vary by several times. Inadequate use of inferior accessories will result in damage, resulting in drooping of window sashes, push-pull motion, sluggish switching, poor sealing, and even potential safety hazards. There are many hard lessons in this regard.
Third, look at production: production equipment and processes determine whether the overall performance of doors and windows is good. According to the requirements of national standards, the difference between diagonals of steel doors and windows should be controlled within 2-3 millimeters, with strict process parameters and control range. This requires a certain amount of production equipment and processes to ensure that there is a quality workforce. . Therefore, the quality of steel doors and windows produced by street-level workshops and regular manufacturers is very different.
Four to see the installation: three-point production, seven-point installation, if you do not pay attention to the installation standards, it may cause future deformation of doors and windows. The coefficient of thermal expansion of steel doors and windows is almost 6 times that of steel, so expansion joints must be left between the window frames and the wall to prevent thermal expansion and contraction or slight settlement of the house to deform the doors and windows. At the same time, in order to ensure the waterproof, heat preservation and sound insulation performance, the expansion joint must be filled with elastic material and then sealed with a sealant. The prices of these materials are relatively high, and the quality varies greatly. It is necessary to strictly prevent the cutting of materials and shoddy materials during installation.
Five services: plastic steel doors and windows have a lifetime of more than 30 years. In the course of use, it is inevitable that there will be glass breakage, hardware damage, etc., and the user is more difficult to solve their own, which requires manufacturers to provide long-term and perfect after-sales service, select the regular manufacturers Certainly more reliable than the flow action.
Six to see the price: the price to shop around, but must be based on the same material and performance than the price, if a greedy cheap, the price is not weighed against the performance, the user is always the loss
Doors, windows, hardware, doors, prices, glass, switch, housing, glass, glass doors
Light is closely related to the growth of crops. Maximizing the capture of light energy and giving full play to the potential of plant photosynthesis will directly affect the benefits of agricultural production. In recent years, driven by market demand, greenhouses have been widely used to produce off-season flowers, fruits, vegetables, etc. Due to the short sunshine time in winter and spring, slow crop growth and low yield, the help of plant lights is needed.
Led Plant Light is suitable for greenhouses, greenhouses and other places. It is an IP66 plant light. Don't worry about damaging the plant lights when you water the plants.
200w Plant Grow Lights has 636 lamp beads in total, it has 504pcs 3000K lamp beads, 108pcs 3000K lamp beads, and the RED with wavelengths of 655-660nm has 24 lamp beads. This is the current popular full-spectrum plant light. The spectrum it produces is the spectrum that plants can absorb, and there will be no invalid light.
If you want to choose a suitable light for your plant, then try this IP65 plant light.
Led Grow Lights,Led Grow Light Full Spectrum,Led Grow Light 200w,Led Grow Light Panel
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelights.com