1. The waterway reconstruction needs to be cautious
It is best not to make too much changes to the water supply and drainage line in the bathroom. If you want to change it, you must decide according to the specific circumstances. If the washing machine is different, the position of the upper and lower water will be different.
2, the circuit needs to be moisture-proof
The wire joints in the bathroom must be tin-plated, and waterproof tapes and insulating tapes must be wrapped in order to ensure safety; the wire body must be covered with flame-retardant tubes; all switches and sockets must have moisture-proof boxes, and the position must also be considered Size and location, to ensure the use of convenient and reasonable.
3, the ground attention waterproof
Before laying the floor tiles, be sure to do waterproofing; after laying the tiles, make sure that the brick surface has a drain slope (usually about 1% is appropriate), the slope is facing the floor drain; the ground must be closed after laying the tile, The time must be at least 24 hours. When paving the floor tiles, attention must be paid to the seams and alignment of the tiles, so as to ensure the overall sense of the entire bathroom so as not to create a cluttered visual impression.
4, sanitary ware installation
It is advisable to remember the hole distance before the decoration, and select the bathtub, bath room, toilet, wash basin and other sanitary ware according to the size, so as to avoid improper size during the decoration; the installation of the toilet shall be sealed with toilet mud first. Then fix it with expansion screws or glass glue so that it is easy to repair when the toilet is clogged.
5, doors and windows to maintain ventilation
It is best to have windows in the bathroom for ventilation; if there are no windows, pay special attention to the details of the doors. In order to prevent the water in the bathroom from overflowing, the door should be slightly higher than the inner side of the bathroom; the gap between the door and the floor of the bathroom should be kept a little larger to facilitate the return; if it is a sliding door, but also in the sliding door and bathroom Make a waterproof layer between the tiles.
6, ceiling selection waterproof anti-corrosion rust-proof material
Because the water vapor in the bathroom is heavy, it is necessary to choose materials that are waterproof, antiseptic, and rust-proof.
7, wall moistureproof and waterproof
The wall tiles should also be waterproof and waterproof, and the tiles should be flat, and must be seamed and aligned with the floor tiles to ensure the integrity of the walls and the ground; if you encounter the outlet of the water supply pipe, the cut of the tiles should be It is small and appropriate, and it is convenient for the flange cover on the water feeder to cover the incision, making the appearance perfect.
8, add a touch of green to the bathroom
The living room and bedroom are not potted patents. The bathroom is properly filled with green and has a unique landscape! In particular, such a long time in a dark room, put a pot of green plants in the bathroom, brought vitality to the bathroom, but also make people feel comfortable in the bathroom. The best choice for potted plants is wet and shade-tolerant plants.
9, exhaust fan to help ventilation
The exhaust fan must be prepared in the bathroom. Most people know this. However, it should be noted that the exhaust fan must have a retrograde gate to prevent the dirty air that was originally discharged from flowing back.
Construction Acceptance Renovation Construction Knowledge Window Glass Switch Socket Electrical Fitting Living Room Glass Tile Glass Sliding Door Glass Door Bedroom Tile Silicone
High Wattage Lamp Emergency Conversion Kit
Replacing Emergency Lights,Best Emergency Light,Automatic Emergency Light,Lamp Emergency Conversion Kit,led battery backup driver
Foshan Nai An Lighting Electric Co.,ltd , https://www.emballast.com