A Stainless Steel Gear Pump is like a piston in a cylinder that is squeezed out mechanically as one tooth enters the fluid space of the other tooth. Because the fluid is incompressible, the liquid and the tooth can not occupy the same space at the same time, so the fluid is eliminated. As a result of the continuous meshing of the teeth, this phenomenon occurs continuously and thus provides a continuous discharge at the outlet of the pump, the same amount of discharge per revolution of the pump. As the drive shaft rotates uninterruptedly, the pump discharges the fluid without interruption. Pump flow directly with the pump speed. Stainless steel gear pump gear, shaft, pump, safety valve, shaft seal composed of the end. The gears are heat-treated to a higher hardness and strength and mounted with the shaft in a replaceable hub. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation. There is actually a limit to the speed of a gear pump, which depends mainly on the process fluid. If the oil is delivered, the pump can rotate at a high speed, but when the fluid is a high viscosity polymer melt When the body, this limit will be significantly reduced. It is very important to push the highly viscous fluid into the two-tooth space on the side of the suction port. If this space is not full, the pump can not discharge the exact flow rate, so the PV value (pressure × flow rate) is another limiting factor, and Is a process variable Due to these limitations, gear pump manufacturers will offer a range of products, namely different sizes and displacements (quantities discharged per revolution). These pumps will be matched to the specific application process to optimize system capacity and price. Stainless steel pumps are versatile, have good hygienic properties and strong corrosion resistance.
Stainless Steel Gear Pump
Chemical dosing pump,Solvent resistant gear pump,Food grade gear pump,magnetically coupled pump,leak free magnet drive pump
Suzhou Macxi Fluid Technology Co.,Ltd. , https://www.macxipump.com