Solid wood composite floor maintenance method

The solid wood composite flooring is beautiful and comfortable, and is widely loved by consumers. In the maintenance of wooden floors, many people lack the common sense of maintenance, so the life of the wooden floor is not long. Xiaobian sorts out some solid wood laminate flooring maintenance methods for everyone to learn.

First, timely check in

After the floor is paved, it should be stayed within two weeks. For a long time unoccupied or infrequently occupied room, put a few pots of water in the room and keep the amount of water, or use a humidifier to make up for the evaporation of water due to the opening of the indoor heating; the indoor environment should not be too dry, not too humid, In case of cracking, shrinking or expansion deformation of the wooden floor.

Second, waxing

In order to maintain the beauty of the three-layer parquet and extend the service life of the paint, you can take a wax every two months, wipe the stains before waxing, and then evenly apply a layer of floor wax on the surface. Wipe the cloth until it is smooth and bright. Prevent strong and long-lasting sun exposure to the floor, so as to prevent the paint from aging and cracking in advance under long-term ultraviolet radiation. Avoid hot and cold winds from household appliances and bake the floor.

Third, waterproof

Prevent rainwater from soaking the floor and prevent overflow in the balcony, bathroom, kitchen, etc. Please close the faucet when going out for travel or water stoppage; especially if the floor is not in contact with hot water, do not spill the hot water in the heating pipe on the floor. Wipe dry in time. Prevent heavy metal sharps, glass tiles, studs and other hard objects from scratching the floor; when moving furniture, you should not push and pull directly on the floor, you should lift it up and put it lightly. Frequently moving furniture can be glued to the bottom of the piece.

4. It is forbidden to place strong acid and strong alkaline substances on the floor.

Inadvertent stains on the surface of the panel should be removed in time. If there is any trace of oil, use an automatic rag or mop, warm water and a small amount of detergent to scrub; if it is a drug or pigment, it must be removed before the stain is dissolved into the wood surface. If the outdoor humidity is greater than the indoor humidity, you can close the doors and windows to keep the room low humidity; if the outdoor humidity is less than the indoor humidity, you can open the doors and windows to reduce the indoor humidity. In the hot and humid weather, you can turn on the air conditioner or electric fan. In order to increase indoor air humidity in autumn and winter, humidifiers can be used to keep indoor air humidity at 50%-70%. (The picture in the text comes from the network)

Emergency Ballast

Emergency Ballast,Emergency Light Ballast,Fluorescent Emergency Ballast,Battery Ballast

NINGBO JIMING ELECTRIC APPLIANCE CO., LTD. , https://www.jimingemergencylight.com

This entry was posted in on