During the renovation, Miss Lin chose to install the whole cabinet in the kitchen. The manufacturer then sent people to the door to measure the size and reserved the location where the range hood was installed. However, Miss Lin failed to determine the brand of the range hood, so the range hood has not been fixed. The salesperson at the range hood store suggested that she should first install the range hood and then customize the cabinet. Should the kitchen be first installed in the cabinet or the first range hood? For this reason, the reporter specifically asked the yellow workers who are engaged in home improvement projects.
Huang Gong said that most of the family's kitchens now have a range hood and a whole cabinet. As for the first range hood or the whole cabinet, many owners do not understand. "In general, first select the range hood, determine the size, and then make the cabinet, otherwise the size of the cabinet will be wrong." Huang Gong explained that whether it is to buy the whole cabinet or look for woodworking cabinets, the owners must Think about the placement of some household appliances in advance, such as whether the microwave oven should be placed in the cabinet, where the range hood should be hung. The purchase of the range hood must be done before the size of the cabinet is measured, so that the position of the hood is accurately reserved when measuring the size of the cabinet. Because the hood can be removed and placed on one side after installation, it does not affect the progress of other projects; and the purchase of a range hood in the first cabinet will cause a large gap between the two, thus affecting the beauty of the kitchen. However, in the actual decoration process, because the construction workers are not responsible, even if the hood is purchased first, there will still be gaps. This is because in the case of unsupervised workers, the construction workers will not hang the range hood to measure the size, but simply measure the size by hand. Some construction workers use measurement tools, but the measurement is not accurate. Therefore, this part must let the construction workers hang the range hood and measure the size before making the cabinet.
Huanggong also said that the size of the construction personnel should be able to install the cooker hood of the owner, because the construction workers are usually reserved according to the size of the largest range hood that can be seen on the market, that is to say All the range hoods can be installed. If the size of the range hood bought by the owner is small, then there will be a gap between the two after installation. This is the place that the owner feels troubled in the future.
Huanggong also reminded that some products that need to be sized in advance are best purchased before construction. For example, the position and size of the range hood need to be determined before ordering the cabinet; when installing the marble countertop, the position and size of the gas stove and the sink should be determined so as to be cut at a suitable position on the stone. If you are looking for woodworking cabinets, you should also measure the size of the basket in the cabinet to make a suitable space separation for the cabinet. If the owner does not have time to purchase the above products before the construction, the construction personnel can wait for a while and purchase the goods before starting work. Small-area kitchens When installing cabinets, the distance between the cabinets and the cabinets must be farther. If the ceiling of the kitchen is very low, the height of the hanging cabinet can be increased appropriately. Otherwise, the cabinet will have a sense of pressure after it is made, so that the cabinet looks smaller than the cabinet, and the whole cabinet will be out of proportion. When making the wall cabinet, it is best to install the wall cabinet close to the ceiling. If there is a certain space between the hanging cabinet and the ceiling, it will not only affect the appearance, but also accumulate oil and dirt, and it is not easy to clean up, which will become a sanitary corner in the future. Source: Qijiawang
Phlizon Foldable Series 1000W 8-bar configuration Folding LED Grow Light is a high-output and full-term lighting solution for indoor vertical farming and grow room, with brand Samsung LEDs and high quality drivers to scale from vegetative growth to higher light intensities in bloom.
It's the best choice for commercial growers and even home growers!
Professional OEM/ODM service available, contact us to build your own light!
FEATURES:
Balanced spectrum, white full spectrum + 660nm deep red Full Phase Spectrum for superior growing power with best possible LED diodes available.
HIGH PERFORMANCE:
1680 - 1850 μmol/s Total Output | 2.6- 2.8 μmol/s System Efficacy (LED dependent)
ENERGY SAVING & EASY HVAC:
Up to 40% energy saving | 40% less HVAC requirement
TOTAL CONTROL:
With knob dimming function, growers can set the ideal intensity at any stage of plant growth for optimal photosynthesis activation. Also, wireless control optional.
EVEN LIGHT DISTRIBUTION:
Precisely designed to deliver uniform levels of photosynthetic flux density, (PPFD).
QUALITY COMPONENTS:
Industrial grade manufactured with brand Samsung Top Bin Diodes and ultra efficient driver.
1000w grow led light, samsung 301b,samsung led grow lamp,samsung301h
Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumlight.com