Low Weight Loss Neodymium Magnet for Motor, Generator

Neodymium Iron Boron Magnets

Collectively known as Neodymium Iron Boron magnets.Neodymium iron boron magnet is a alloy that composed
by neodymium, iron, boron and a few transition metals like Dysprosium, Gallium .etc. Through  these  melting pressing, Sintering, Machining,Coating, Magnetizing processes to form block,  bar, Cubic, cylinder, ring,arc shapes.

Main Manufacturing process of ndfeb magnets 
1.Pressing ndfeb garins: pressing process was operated in strong magnetic environment.
2.Sintering of ndfeb blocks: sintering was processed in a vacuum furnace.
3.Wire cut: ndfeb magnet are fragile materials,usually specified dimensions was required, genneral cutting process could not reach the standard of sizes,usually cutting process had operated in wire cut machines.
4.Grinding process: Grinding process: To reach the tolerance, a diamond polish tool is needed.
5.Plating: Neodymium magnets had been treated with electrical plating,otherwise it will rust in the air. Platings that have been successfully applied to neodymium magnets are epoxy plating,nickel plating,NICUNI plating,zinc palting and even silver plating and gold plating.
6.Magnetization:the procedure are processed with magnetization machine which have a magnetic feild ranged from 2~100 koe.

Coatings available & Tests 
Coatings Available: Zinc, NiCuNi, Epoxy, Gold, Silver, Tin etc. 
Tests:Plating Thickness Test,Salt Spray Test,PCT Test 
Quality Guarantee
Shine Magnetics has focused on quality control since its founding. Necessary and strict checks and tests are taken in all production processes to make sure any products made by us are trouble free. To work with Shine Magnetics is to get the most reliable supplier of magnetic products. It goes without saying that our magnetic products comply with the highest quality standards. We are working continually to improve the quality and process of the products. 
Following Tests Could be made as per customers` requirements: 
HAST Test: Test Condition: 132.9ºC, 95% humidity, 2.9 ATM, 7 days
Weight Loss: 3mg/cm³
 
 


   
        
Shine Magnetics has focused on quality control since its founding. Necessary and strict checks and tests are taken in all production processes to make sure any products made by us are trouble free. To work with Shine Magnetics is to get the most reliable supplier of magnetic products. It goes without saying that our magnetic products comply with the highest quality standards. We are working continually to improve the quality and process of the products.
Following Tests Could be made as per customers' requirements:
HAST Test: Test Condition: 132.9ºC, 95% humidity, 2.9 ATM, 7 days
Weight Loss: 3mg/cm2

 


Package and Delivery


Standard package for sea and air delivery.
Delivery is about 15~20 day after confirm the order.
Our Advantages

1 All NdFeB magnets used are made by our own magnet factory.
2 Standard producing process and strict quality checking
3 Our know-how experts of the magnet industry.
4 Competitive price,stable quality, timely reponse


 

Hot Pipette Tips

The commonly used Pipette kits are mainly composed of a pipette and a pipette tip. The pipette tip is a single empty
Cavity reservoir; the pipette uses the principle of air displacement and controls the maximum displacement of the piston by rotating a screw with an ultra-fine thread
displacement, and then control the amount of liquid suction. There are the following problems when using the above kit for suction: 1. The suction volume is controlled by the pipette
After the pipette is sterilized or used for a period of time, it is easy to cause "hidden" failures, which cause the operator to be difficult to detect.
The actual suction volume is inaccurate, and it needs to be adjusted frequently, and the operation is cumbersome and time-consuming; 2. To improve the pipetting accuracy, the operator's
The operation requirements are high, and it is easily affected by factors such as the suction speed, the depth of the tip below the liquid level, and the inclination angle of the pipette.
The actual suction volume will be heard; 3. The actual suction volume will be affected because the suction head cover is not tight and leaking, and it will not be easily detected; 4.
When performing experiments that require high accuracy, such as analysis, in the operation of equal volume aspiration of liquids with different densities, the actual
The actual suction volume will be affected by the density itself; 5. In order to improve the accuracy, this type of pipette needs to carry out high
Cost-optimized design results in extremely high pipette costs.

1000 ul pipette tips,200ul pipette tips,10ul pipette tips,low retention pipette tips

Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yymeds.com