Home decoration, many users will install plastic screens, but many people do not understand how to dismantle plastic steel screens . As the screens are used in daily use, they are not always used without disassembly. If the screens are damaged and dirt is collected, they need to be disassembled. The following small series will introduce how to dismantle plastic steel screens and how to clean plastic steel screens.
First, how to remove plastic steel screens
1, first to break the broken glass, use professional tools or thinner tools in advance to remove the bead, remove the two long bead, then unload two short, then remove the double glass, remove Glass shards, pay attention to not to hurt the contact surface of the enclosed bar as much as possible, use a professional cutter to flatten the insert and cut it.
2. After replacing the new glass, measuring the size, and the thickness of the glass, go to the market to purchase a glass of suitable size and a professional adhesive. First of all, the new glass should be cleaned and the original layer of glass should be cleaned. Otherwise, it cannot be cleaned after installation. Finish the contact surface of the closed strip, place the glass, make sure there is no debris and dust inside, and seal it with adhesive.
Second, plastic steel screen cleaning method
1. The plastic steel screens should be cleaned by one-sided rubbing, because some invisible screens are cascaded. If the screens are wiped out immediately to implement a comprehensive rubbing, it is very likely that the screens will be damaged. Not convenient.
2, the more smoke kitchen, you can put some more waste newspapers on the ground, the rewinding screens win, and then laying waste paper on the screens, with a spoon on the hard scraping, so that a large number of oil adhesions in the old newspaper, Repeatedly replace newspaper sticky oil. Until a lot of stains have been glued out of the newspapers, they are brushed around with a brush cleaner, then cleaned with a wet cloth and coated with a little bit of oil to prevent rust.
3, you can use the home's unwanted newspapers, soaked in water and paste it on the screens, wait and take it down, then do not wait until dry and then won, repeated several times, the window will be very bright .
4, run into a lot of dust or dust screens, first use the vacuum cleaner to suck it carefully on both sides, please be sure to grasp the essentials in order to clean the dust. To put waste newspapers on the other side of the screen, suck it with a vacuum cleaner so that the dust in the gaps in the screens can be sucked clean. After spraying with water-based cleaner, gently press with a soft sponge to suck up the sewage. When you press, the force must be uniform, otherwise the screen may loosen or sink.
Summary: The above is the introduction of Xiaobian about how to dismantle the plastic screens and the cleaning method of the steel screens. I hope to help everyone! In order to ensure the integrity of the screens and daily use, it must be very Carefully use the correct method to disassemble and replace. If you want to know more related information, please continue to pay attention to this site.
How to remove plastic steel screens
Split Case Pump,Horizontal Split Case Pump,Vertical Split Case Pump,Double Suction Split Case Pump
Zhengzhou Shenlong Pump Industry CO.,Ltd , http://www.waterpump-manufacturer.com