Model NO.: DF-80L
Certification2: RoHS, SGS, DGM,
Countertype: Surfynol 110PG
Trademark: Toynol
Transport Package: 200kg Drum
Specification: 50%
Origin: Tianjin
HS Code: 3402130090
Toynol DF-80L defoamer effective additives in concrete formulations
Product Description
Â
Â
Chemical Compostion
Â
Â
Macromolecule AcetylenicDiol-based Product
Â
Â
Applications
Waterborne inksÂ
Paper coatings
Fountain solution
Latex Dipping
Waterborne varnishesÂ
Waterborne Can coatings
Acid Pickling
ElectroplatingÂ
Waterborne automotive coatings Â
Metalworking Lubricants
Agricultural Chemicals
Concrete and Oil Well Cementing Â
Waterborne inksÂ
Paper coatings
Fountain solution
Latex Dipping
Waterborne varnishesÂ
Waterborne Can coatings
Acid Pickling
ElectroplatingÂ
Waterborne automotive coatings Â
Metalworking Lubricants
Agricultural Chemicals
Concrete and Oil Well Cementing Â
Characteristics
1. Excellent foam knock down properties
2. Good control of foam introduced by other surfactants
3. Effective against micro-foam
4. Solve the incompatibility due to silicone-and oil -based defoamers
5. Excellent stability over a wide range of storage conditionsÂ
Â
2. Good control of foam introduced by other surfactants
3. Effective against micro-foam
4. Solve the incompatibility due to silicone-and oil -based defoamers
5. Excellent stability over a wide range of storage conditionsÂ
Â
Typical Properties
Â
Â
| Items | DF-80L | DF-80D | DF-80B | DF-110B | DF-80PG |
| Appearance | Yellow liquid | Yellow liquid | Yellow liquid | Yellow liquid | Yellow liquid |
| Active Content | 20% | 32% | 32% | 50% | 50% |
| Solvent | PG&EG | DPG | BCS | BCS | PG |
| Flash Point(ºC) | >110 | >100 | >80 | >80 | >80 |
| Solubility | Insoluble | Insoluble | Insoluble | Insoluble | Insoluble |
Addition levels
0.2 -2 wt.% Optimal concentration levels should be determined by running a ladder study.Â
Direction for UseÂ
 When Keep agitating at least 15-30 minutes to mix well. Heat up properly when the viscosity is increasing.
Add Toynol® surfactants at the last step, especially after other surfactants or polymers so that it can be dissolved and dispersed well in the system .
3. In order to wet out substance well and against the foam introduced by agitation, it is better to add Toynol®surfactants earlier than all the dye filling and other solid materials.
4. Toynol® is a multifunctional product which can replace one or more additives in the formulations.
5. Under lower temperature, solidification and crystalline of Toynol® occur during transportation and storage. Heat it up to its melting point, it would turn back to normal state without any impacts.
Direction for UseÂ
 When Keep agitating at least 15-30 minutes to mix well. Heat up properly when the viscosity is increasing.
Add Toynol® surfactants at the last step, especially after other surfactants or polymers so that it can be dissolved and dispersed well in the system .
3. In order to wet out substance well and against the foam introduced by agitation, it is better to add Toynol®surfactants earlier than all the dye filling and other solid materials.
4. Toynol® is a multifunctional product which can replace one or more additives in the formulations.
5. Under lower temperature, solidification and crystalline of Toynol® occur during transportation and storage. Heat it up to its melting point, it would turn back to normal state without any impacts.
Handling
This product should be sealed and placed in a dry, cool, well-ventilated place at room temperature away from fire source. For any other information, please refer to MSDS.
Â
Â
Packing & Delivery
Â
Packing Details  : 200ml bottle, 25kg plastic drum, 200kg iron drum
Delivery Details : Express for sample, Airfreight and Ocean freight for products
Delivery Details : Express for sample, Airfreight and Ocean freight for products
Â
Our Certifications
Â
ISO9001:2008 Quality System Certification
ISO14001:2004 Environment System Certification
ISO14001:2004 Environment System Certification
OHSAS18001:2007 Certiciation
Customer Photo
Overseas Visit to European Customer
Through visit to customer, our communication was improved futher and establish long term friendly cooperation relationship.
Communication on the Show
Â
Many customers came to our booth on the show and reach a good agreement on cooperation.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory with Certification of ISO9001:2008, ISO14001:2004 and OHSAS18001:2007.
Â
Â
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Â
Â
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge and pay the cost of freight if you sincerely test.
Â
Â
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
If you have another question, pls feel free to contact us as below:
Led Aluminium Profiles,V Slot Aluminium Extrusion,Modern Aluminum Extrusion Profile,Led Light Aluminum Profile
Guangdong Jihua Aluminium Co., LTD , https://www.jihua-alu.com