Wall paint:
After shoveling the original wall surface, first use the putty powder to level the wall surface, usually two times, mainly according to the flatness of the wall. After one time, sand the paper and then scrape it for a second time; after leveling, it can be shaved. Generally speaking, it is also two times. It also needs to be sanded after each scraping. The last is to brush the latex paint. The latex paint is usually two times, but it is necessary to wait for the first time to completely dry and then brush the second time.
Wood paint:
Do not work with latex paint at the same time. It is recommended to first brush the wood paint and then paint the wall finish to prevent the components in the wood paint from contaminating the wall. Before painting wooden furniture, you need to protect the hardware on the workpiece with textured paper to prevent the hardware from being stained with wood. Under normal circumstances, it should be painted first, followed by door locks, handles and latches.
Paint acceptance
Wood product acceptance criteria:
(1) There must be no whitening or yellowing on the surface of the paint film. The surface should be saturated and clean to ensure that there are no particles. The door lock should be protected when painting.
(2) Touch the surface of the wood by hand to see if it is smooth. Make sure that there is no foaming, no cracks, and that the paint thickness is balanced and the color is consistent. There shall be no leakage or brushing on the side or bottom of the furniture.
(3) In addition to the smooth and smooth surface, the varnish texture is clear, the surface is free of ribs, falling and wrinkled skin, the color is basically the same, no brush marks. There shall be no bulging at the joints, and the horizontal and vertical deviation shall not exceed 0.5mm.
Wall paint acceptance criteria: (1) Stand at a distance of 1m to visually check the wall surface to see if the surface of the latex paint on the wall is flat and evenly flooded. There is no hollowing, blistering or cracking; all beams, columns, doors and windows are sideways. The yin and yang angles should be straight and square.
(2) The surface of the latex paint should be the same as the paint. It should be free of falling and wrinkled skin. The color should be consistent and there should be no obvious brushing. The variety, color and coating of the coating should be consistent with the sample. It should not be dropped, peeled, leaked and penetrated. It is usually on both sides.
(3) The acceptance of paints and paints is actually similar. The corners and corners are special places to pay attention to. Sometimes some cracking starts from the corners.
[Follow the WeChat public number "Jiuzheng Paint Network"; pay attention to surprises, scan code to view "If your husband is selling paint..." Jiuzheng Coating Network Exchange Group]
Air Conditioner Copper Pipe,Seamless Copper Pipes,Flexible Copper Pipe,Air Conditioner Connecting Pipe
Suzhou Green New Material Technology Co., Ltd. , https://www.szgreenvip.com