Currently on the market, plate furniture is mostly made of particle board and medium density board. Since both types of wood are made of wood and crushed and mixed with adhesive, the amount of glue determines the chemical composition and determines the degree of environmental protection. High and low. What kind of plates are more environmentally friendly to consumers? Xiao Bian talk about it today, the advantages and disadvantages of particleboard and density board.

Solid wood particle board, which is scrap wood made of wood or other lignocellulosic material, is applied to the adhesive and synthesized by heat and pressure. The principle is the same as the density board.

advantage:

1. The interior of the wood particle board is a granular structure with cross-stitch structure. Therefore, the nail holding force is good, nails can be nailed, screws. These machinability properties are significantly better than density plates.

2. The density of solid wood particle board is relatively high, and the wood fiber particles in the board are larger, and the nature of natural wood is more retained. The content of wood particle board in the adhesive is generally lower than 5%, and the environmental protection is better.

3, solid wood particle board warping and deformation is small, good dimensional stability, high strength, good stiffness, heavy clothing is not easy to bend. The wood-based panels currently used in the European furniture market are mainly solid wood particle boards.

Disadvantages: The flatness of solid wood particle board is not as good as that of density board. It is more difficult to make radian and shape.

Density board is also a medium-density fiber board, which is a kind of artificial plate made of wood fiber or other plant fiber as a raw material, which is broken, separated by fibers, dried and then applied with urea-formaldehyde resin or other suitable adhesive, and then hot-pressed. .

Advantages: The material is relatively fine, and when the cutting edge is sealed, it will be sealed well so that it is not easy to open the glue. Easy to press into a variety of shapes, easy to shape, so usually do more of the door or back plate.

Disadvantages: Because the substrate is a powdered material, the glue used is more than the particle board, and it is more likely to cause environmental problems. Secondly, due to the high glue content of the MDF, the internal structural space is small, and the moisture resistance is poor. Soaking a piece of density for 24 hours in the water makes it clear that after ten hours, the four sides of the MDF are raised and deformed.

In general, density boards and particleboards have their own advantages and disadvantages. However, as a durable product, wardrobes are naturally crucial except for price. The choice is to spend less than a few hundred yuan, or would rather extend the wardrobe at home. For several years or even ten years, the pros and cons of those are naturally self-evident.