The use of wood floors in modern homes is primarily a warm feeling for the family, and it is relatively small compared to the later loss of floor tiles. However, there are many methods for laying wooden floors. In daily life, we often ask questions such as “Whether the floor is horizontal or vertical?†The following questions are related to the direction of laying the wooden floor and the notes on paving.
Wooden floor lay direction
1) Find benchmarks
Take the long side of the living room as the direction of the shop. If the living room is floored, then other rooms will be paved along the direction of the living room; if the living room does not have solid wood floors, then the direction of the long side of the restaurant will prevail; other rooms are also It is laid out in the same direction; if the restaurant is not covered with wooden floors, then each room can be laid out independently, and the direction of the long side of each room is the basis, and it does not need to maintain the same direction.
2) Light source
Solid wood flooring laying direction can be laid in accordance with the light source.
3) Walkway
The average walkway is relatively narrow, so it should be laid down the walkway.
In fact, Xiao Bian think: solid wood flooring laying direction is not fixed, there is no paving principle, beauty and comfort is the first principle that should be pursued.
Flooring notes
1, before installation, floor ventilation to taste dehumidify
In general, when you buy a floor, you usually pay attention to the content of formaldehyde, but before you install it, you forget about the presence of formaldehyde. Ventilating the floor before installation can not only allow the floor to adapt to the climate from the processing plant to the decoration site, but can also be deodorized and dried. However, playing such a big role does not require much effort. As long as the packaging is completely disassembled and the floor is folded into a “well†shape, no more than 1 meter can achieve the desired effect.
When the floor is laid, some owners will suddenly find that the floor of the home is not flat enough, and there is a large gap between the foot line and the floor. This not only affects the visual appearance, but also affects the service life of the floor, and even the sound insulation effect is relatively poor. During the renovation, we should pay attention to keep the ground level, and the difference in level within 2 meters is less than 5 mm. Strictly following the requirements will avoid the maintenance problems of many later floors.
2, the floor paving process should pay attention to the seam straightness
The long side of the floor paving floor is generally free of glue. The short side of the floor can be determined according to the specific regional climatic conditions whether the D3 waterproof glue sizing is adopted. The short side seams of the adjacent floors should be staggered by a distance not less than 300mm. When the width of the inner decking is greater than 12m in the regular room type, it is better to use a pressure strip partitioning treatment. In addition, during the floor paving process, care should be taken to maintain the straightness of the seam in the direction of the long side of the floor.
3, pay attention to the floor laying not to accidentally injure the room pipeline
General renovation program designers finished directly to the decoration master, met a careful master is also good, if encountered a careless, the laying of the pipeline in each room is not clear, but the installation of the floor but interrupted the pipeline. Wait until the acceptance of the project to find these problems. This will not only require reinstalling pipelines, but also a waste of construction time. In fact, as long as the installation of a reminder before the installation of clear spring pipeline region, can completely avoid such emergencies.
4, the surface of the floor laying should be dry and level
The surface of the floor is required to be dry, clean, flat, and strong, and the flatness should be less than 3mm/2m. If the keel is laid, the paving requirements of the wood keel and the wool flooring shall comply with the relevant requirements of the technical specification of the wooden flooring paving engineering of CECS191:2005 of China Engineering Construction Standardization Association.
5. Note the consistency of floor laying height
Whether the floor laying height is consistent affects the appearance of the floor laying directly. Therefore, we must make a good selection of models according to the laying thickness to prevent height difference. The height difference not only affects the visual appearance, but also reduces the floor life. Before the installation, make full preparations, pay attention to all kinds of precautions, and do all the ex ante work. It will save you time and effort and save money and money. Why not?
Wood floor maintenance
1, keep clean and dry solid wood flooring in use, must be maintained at all times in order to extend its life. When used normally, keep the floor dry, clean, and avoid contact with large amounts of water. When cleaning, use a special cleaning agent to clean the floor, avoid the use of alkaline water, soapy water and other corrosive solutions, but can not use gasoline, alcohol and other flammable and high-temperature solution wipe.
2, regular waxing
It is best to use solid wood flooring once every once in a while, waxing at least twice a year. The method is to first wipe the floor with a clean, semi-dry cloth, and then wax it. The floor wax should be evenly smeared and “saturated,†and when it is slightly dry, wipe it back and forth on the floor with a dry soft cloth until it is smooth and bright. Note: If you are laying laminate flooring in your home, you don't need waxing!
3, avoid direct sun, avoid high-temperature sharp objects
After the pavement is installed, the sun should be kept to a minimum in order to prevent the paint from prematurely cracking and aging due to UV irradiation. Don't throw cigarettes or matches and other kinds of fire on the floor so as not to scorch the floor surface; at the same time, avoid sharp, sharp objects, and heavy objects that are under heavy pressure for a long time.
4, individual damage, individual maintenance
During the use of solid wood flooring, if individual floors are found to be warped or detached, the floor shall be taken in time to remove old glue and ash, apply new glue, and compact; if the individual floor paint film is damaged or white, 400 can be used. The water sandpaper, soap, and water are polished and then wiped clean. After being dried, a local complementary color is performed. After the color is dry, a paint is applied and dried. After drying for 24 hours, polish with a 400-grit water sandpaper and polish the wax.
Editor's summary: About the direction of laying the wooden floor is introduced here, after understanding the laying rules of wood floors, I believe everyone in their own decoration, will be able to lay their own satisfaction with the wooden floor. If there are other questions, you can leave a message and we will reply you as soon as possible! For more information, you can follow this site information.
Wood floor solid wood floor top ten brands solid wood flooring
Modern decorative table lamps come in a variety of styles, materials, and designs to suit different aesthetics and interior decor. Some popular modern decorative table lamps include:
1. Minimalist designs: These lamps feature clean lines, geometric shapes, and a simple color palette. They often use materials like metal, glass, or concrete for a sleek and contemporary look.
2. Industrial style: Industrial table lamps incorporate elements like exposed bulbs, metal frames, and rustic finishes. They add a touch of urban chic to any space.
3. Mid-century modern: These lamps draw inspiration from the design trends of the 1950s and 1960s. They feature organic shapes, bold colors, and materials like wood and brass.
4. Artistic designs: Some modern decorative table lamps are designed as works of art themselves. They may have unique shapes, patterns, or textures, making them a focal point in the room.
5. Eco-friendly options: Sustainable and eco-friendly table lamps are becoming increasingly popular. They use energy-efficient LED bulbs and sustainable materials like bamboo or recycled glass.
6. Smart table lamps: With the rise of smart home technology, there are now table lamps that can be controlled through smartphone apps or voice commands. These lamps often have features like adjustable brightness, color-changing options, and timers.
When choosing a modern decorative table lamp, consider the overall style of your space and the purpose of the lamp. Whether you want it to provide ambient lighting, task lighting, or simply serve as a decorative accent, there is a wide range of options available to suit your needs.
Table Lamp,Modern Table Lamps,Decorative Table Lamp,Desk Lamp
Zhongshan Seekyo Lighting CO., Ltd. , https://www.seekyomodernlamp.com