Nowadays, more and more homeowners are always ranked first in the safety of their decoration. Therefore, even if it is home improvement, there must be no potential safety hazard. The most likely safety hazard is the floor tiles. Most of them are now. Consumers use non-slip tiles for paving the safety hazard. Then, let's take a look at the types of non-slip floor tiles.
Non-slip floor tiles
Non-slip floor tile is a kind of ceramic floor tile, which has wrinkles or bumps on the surface, which can increase the friction between the floor surface and the human foot or sole, so as to prevent slipping and falling. Non-slip floor tiles are mostly used for the decoration of houses, and more are laid with bathrooms and kitchens.
Non-slip floor tile type introduction
The types of non-slip flooring are divided into whole body tiles, glazed tiles, vitrified tiles, and polished tiles. Whole brick is a non-glazed porcelain brick with good anti-slip properties; glazed tiles are divided into clay and china clay; the strength of the brick is very high, and the glazed surface is smooth; the vitrified tiles are porcelain that has been fired at high temperatures. Quality brick, the highest hardness, waterproof, moisture-proof, wear-resistant; polished tiles have been polished, wear-resistant, high hardness.
Non-slip floor tile advantages
1. The anti-slip floor bricks have many colors, novel styles and good decorative effects;
2, non-slip floor tiles tough and comfortable, ultra-light wear-resistant, long life;
3, non-slip floor tiles slip, wear, moisture, is the ideal brick;
4, non-slip floor tiles to ensure the safety of the family, not only beautiful and practical.
Non-slip flooring transfer to buy skills
1. The non-slip brick anti-skid coefficient setting specification is divided into five grades: the slip coefficient is below 0.34, which is extremely dangerous, between 0.35 and 0.39 is very dangerous, between 0.40 and 0.49 is dangerous, slip coefficient 0.5 It is in compliance with the "safety" rating, and it is very safe for 0.6 or more. In the purchase of non-slip floor tiles, first of all to find businesses to floor tiles test report, see the above coefficient of friction, the general friction coefficient and above the anti-slip brick, it is relatively safe.
2, the eye view hand touch: If the brick surface is generally smooth and smooth like a mirror, slip resistance is generally poor; at the same time touched by hand, according to the handle can make basic judgments, the general sense of touch the more astringent slip better.
3, foot test: When you buy floor tiles, the first consultation with the store is good, you can walk directly on the brick surface, test the anti-skid effect, if you walk to feel the slippery, do not choose this kind of brick for the kitchen and balcony.
4. Test water test: Shop two pieces of larger floor tiles (some factories may have a layer of oiled paper or wax on the bricks, first remove them), take a cup full of water, and sprinkle the water in the glass on the floor tiles. Above, and then wearing shoes on the floor tiles sprinkled water and walk around, feel there is no slippery feeling.
Non-slip floor tile maintenance
If the anti-slip floor tiles are not properly maintained, the anti-slip performance will be reduced when they arrive. At this time, we can use the anti-slip agent marketed on the market. During the treatment, we should keep the surface wet, hard tiles take about 5 minutes, glazed tiles take about 15 minutes, and mosaic tiles take about 20 minutes.
What are the types of non-slip floor tiles? Introduced here, we now know how to choose non-slip tiles? If there are other questions, please leave a message and we will answer you as soon as possible! For more information, please follow this site!
Flooring Flooring Home Improvement Home Decor Flooring Anti-slip Flooring Tiles Bathrooms Waterproof Toilet Tiles Bathroom Tiles Floor Tiles Kitchen Tiles
The globe valve is used to cut off the flow of the medium. The globe valve is suitable for frequently opened occasions. The sealing parts of the globe valve are the disc and the valve seat. In order to make the globe valve close tightly, the mating surface of the disc and the valve seat should be grinding or using gaskets. The sealing surface can also be inset with bronze, stainless steel and other corrosion-resistant and wear-resistant materials. The disc and stem of the globe valve are connected with each other, so that the disc and stem are closely fitted. The lifting of the disc of the globe valve is generally controlled by the stem. The upper part of the stem of the globe valve is the handwheel, and the middle part is the thread and packing sealing section. The role of the packing is to prevent the internal medium of the valve body from leaking along the stem.
Globe Valve,Globe Control Valve,Globe Valve Types,Flanged Globe Valve
WUXI KVC-VALVE , https://www.wxkaiweixi.com