The post-processing program for turning and milling combined machining not only requires post-processing for multi-axis CNC milling, turning and drilling, but also enables sawing, automatic feeding, tailstock control and program cycle calls. The emergence of milling and compounding lathes provides an effective solution for improving the machining accuracy and efficiency of aerospace parts. The turning and milling composite machining center can not only complete the whole processing of the above process by one card loading, but also can realize the batch processing of the impeller through the functions of sawing and automatic feeding when the bar material is used for processing, and the whole process can be performed without manual intervention. All done automatically.
At present, the programs after the completion of the general software are independent of each other. To realize the complex automated complete processing such as turning and milling, it is necessary to integrate and integrate these independent processing programs. In order to realize this function, it is necessary to carry out systematic and in-depth study of the process plan in the pre-process design, determine the serial and parallel sequence of the process route, and realize the above functions through reasonable combination of the process programs.
Corresponding to the NC programming technology, the turning and milling composite machining has higher requirements for the current post-processing software and technology due to the complicated process and many moving parts. Then determine the processing sequence of different process methods, and give accurate tool change, card replacement, benchmark conversion, and advance and retract tool commands.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Common parts: a flow channel plate, lining Sand
Main material: high manganese steel, chrome-manganese, high chromium (Cr13, Cr20, Cr23, Cr26, Cr28, etc.), carbide
Casting Process: water glass sand casting and lost foam casting process
Adapt materials: river pebbles, rocks (limestone, granite, basalt, diabase, andesite, etc.), ore tailings, stone chips
Applications: quarry gravel, concrete sand.
Barmac Vsi Crusher Parts,Barmac B7150 Vsi Crusher Wear Parts,Carbide Vsi Crusher Wear Parts,Barmac Vsi Crusher Wear Part
Ma An Shan Shi Bo Da Jing Shen Machinery Co.,ltd , https://www.bodamachinery.com