With the progress of the times, modern people are generally pursuing a healthy lifestyle and have higher requirements for living facilities, especially for children. Rubber mats are safe and environmentally friendly and are the best choice for children's playgrounds and other facilities. Follow the small series together to see: what is the rubber floor mat and rubber mat construction process process Raiders.
First, what is a rubber mat:
Rubber mats are mats made of natural rubber, synthetic rubber, and other high-molecular materials. Butyrobenzene, high benzene, and butadiene rubber are synthetic rubbers and are products attached to petroleum. Natural rubber refers to rubber grown by artificially cultivated rubber trees. Rubber mats are environmentally-friendly mats because all materials are non-toxic and environmentally-friendly materials and polymer-friendly materials.
Rubber floor mats have a variety of colors, high density and very durable; the bottom layer is black soft rubber, so that the mat absorbs all kinds of impact, thus protecting the user's safety.
The rubber mat has perfect impact absorption performance, its surface layer is of various colors (red, yellow, blue, green, etc.), high density and very stable and durable rubber, and the bottom layer is black soft rubber material combined with the new generation imported Germany BASF environmental protection Glue extrusion molding, effectively protects users from damage caused by falling from high places, product physical high, environmental protection, easy to clean and good drainage suitable for laying on the ground inside and outside use is the best choice to protect children's safety . Castable construction can be used to form seamless elastic mats. The rubber mat provides perfect collision absorption performance, reduces the damage caused by falling from high places, is durable and easy to clean, and is suitable for laying on the ground indoors and outdoors. It is the best mat to protect children's safety.
The scope of use of rubber mats: children's amusement parks, kindergartens, primary and secondary school sports equipment, parks, pedestrian bridges, shooting ranges, gymnasiums, nursing homes, national fitness path areas, and physical playgrounds.
I. Precautions for construction of rubber mats:
1. The construction site should be avoided at the same time as other projects.
2, the ground to be laid should meet the following requirements:
A. Solid: The floor to be laid should be a solid concrete floor, and it cannot be a sand, soil, or soft ground.
B. Leveling: The floor to be paved should be smooth and smooth, with no obvious grooves or pit bosses.
C. Cleanliness: The floor to be paved should be clean and there should be no dirt, slag stains or other debris.
D. Drying: The floor to be paved cannot be damp or have water.
Second, pavement method:
1, the floor should be suitable for the ambient temperature before laying (the same with the ground temperature at the grassroots level). Great changes in temperature should be avoided during laying and adhesive drying.
2. Spread the glue evenly on the ground floor and the back of the floor to be laid. When the glue is dry, align the blocks one by one, and use a rubber hammer to tap. If the adhesive contaminates the floor surface it should be removed immediately.
3. If the corners of the floor have not been aligned, the hollow ridges are raised and the edges are tilted. The correction or resurfacing is required. It must be done before the adhesive is dry.
4. After the laying work is completed, since the adhesive is not yet in the natural drying process, the wet cleaning work must be done after the adhesive has completely dried (about 48 hours).
Editor's summary: What is the rubber floor mat and rubber floor construction process Raiders introduced here, I hope to help you, more information, please pay attention to this site.
Door mat children's floor mat
The RFID cards in 85.5X54mm, size in 0.76-0.86mm (30mil - 33.9mil), custom size and shape accept too. SunwayRFID is a 8 years old OEM/ODM capability manufacturing.
The RFID Card in white can do 5 working days production, 3-4 days delivery to oversea.
If you need your preprinted, time need more 2-3 working days.
Besides logo printing, unique QR code, laser, barcode, signature panel, program the tag, encoding the ULR, we all can service you too.
From 125khz and 13.56mhz to 860mhz - 960mhz rfid cards all are our production scope.
If you need inkjet printable card, or thermal printable card, just let us know. Our cards can do inkjet printing or thermal printing too.
Fast lead time, high quality, custom service and best price!
RFID Card
RFID Card,RFID Smart Card,NFC Card,NFC Black Card
Sunway Smartech Co.,LTD , https://www.sunwayrfid.com