What are the decoration wall? Steps to decorate the wall

I am used to the decoration of the same flat wall, does it feel a little aesthetic fatigue? For this situation, some people's creativity is very good, they advocate the decoration of the wall. It doesn't sound like a novelty, but the finished product is often bright, what do you pay attention to when decorating the wall? Then everyone will follow the small series to see the relevant content of the decoration wall .


装修造型墙


First, the construction process of the concave and convex modeling wall


1. Use xps or eps to cut out a piece of the shape you want, wrap it around with a self-adhesive mesh cloth, then bond it to the wall with a bonding mortar, and finally apply a thin layer of mortar on the outside, then outside. Doing paint, it will be more troublesome to do, but it is very economical.


2. Use wooden strips to cut out the desired shape, bond to the wall with super glue, and paint on the outside of the strip.


3. Directly use the long strip of cultural stone, glued to the wall, the shape may be slightly different from the picture, but the effect is absolutely good.


Second, the method steps to decorate the modeling wall


1. Stir first, prepare water according to the construction amount, add dry powder of diatom mud, add appropriate amount of water, stir with electric mixer, stir while adding water as needed, stir well and then use. (Note: The product after mixing with water is best. Used up.)


2. Apply and then pry the bottom of the wall, and then wipe the second layer when it is dry. The surface should be smoothed. Jinan Sent diatom mud


3. Spray or smear the texture pattern to wipe the second surface layer, wait until the surface is not reflected by water, use a special tool to make the texture on the surface of the wall, make the surface of the wall rich in artistry, and then use the light trowel Receive light. Spray the second surface layer, wait for the surface of the water to light up, and collect the light twice. Place the graphic template on the wall and apply the diatom mud to the template to make a pattern.


4. Clean the protective tape at the construction site, and flatten the burrs of the tape with a light-collecting trowel.



装修造型墙


Third, the construction method is to directly fix the line to a certain position (on the wall).


If you use wood lines, the surface is brushed with wood lacquer, while with plaster lines, the surface is brushed with latex paint, which can be the same or close to the wall paint; the shape can be wallpapered, or other art paint.


When making, if it is a wall-mounted TV set, the wall should have a position (with embedded pendant or strong base) and enough sockets. It is best to bury a thick PVC pipe. All the wires pass through. The root canal is placed on the lower TV cabinet, and the DVD cable, closed route, and audio cable are installed inside.


The width of the living room must be considered during design. Generally speaking, the optimal distance between the human eye and the TV is 3.5 times that of the TV. Therefore, do not make the TV wall too thick, resulting in a small living room.


First measure the position of the sofa, determine the position of the TV after determining the position of the sofa, and then determine the shape of the wall by the size of the TV.


Consider the light above the TV.


The TV wall generally echoes the partial ceiling of the top surface. There are generally lights on the ceiling. Therefore, it is necessary to consider the wall shape and the lighting, and also consider not to illuminate the TV with strong light, to avoid eye fatigue when watching the program.


When the background wall is under construction, the thickness of the floor tiles and the height of the baseboard should be taken into consideration to make the various shapes coordinated. If the skirting line is not designed, the installation of the panel and the gypsum board should be after the construction of the floor tiles to prevent moisture.


Painted, is a relatively fresh background wall technique


The hand-painted background wall is undoubtedly the most individuality.


Especially for young people after the 80s, the personalized style is more important than the noble and luxurious features.


This freely DIY hand-painted TV background wall approach caters to their needs.


How about, I read the wonderful introduction of the quality of the lamps above. Have you learned a lot about the quality of the lamps and lanterns? I hope that you can learn more about home improvement knowledge through this article, and you will be able to create a more perfect home environment. Thank you for reading this article and your support and love for Xiaobian. If you want to get more information about home improvement, please continue to pay attention to the decoration home network.


Solder For Double-side PCB

Solder For Double Side Pcb,Double Side Welding Wire,Tube Packing Wire Length 4M,Double Sided Pcb Soldering Wire

NINGBO XIHAN TIN SOLDER CO.,LTD. , https://www.soldertop.com

This entry was posted in on