Use and installation of aluminum buckle in home decoration

Aluminum gussets are the ceiling materials used in kitchen ceilings. How do I install aluminum gussets? Here's to tell everyone how to install the aluminum buckle board and aluminum buckle board installation precautions.

1. Strike a horizontal line on the wall around the room. Determine the elevation of the ceiling according to the design elevation and use the horizontal line as the benchmark to locate the center point of the room and follow the horizontal line of the ceiling. Center the center of the room. Draw a keel position line on the wall.

2. Install the main keel hanger: After playing the horizontal elevation line of the ceiling and the keel position line, determine the height of the lower end of the boom and install the pre-processed boom. The installation of the boom is fixed on the original top surface with 8mm diameter expansion bolts. . Hangers use 8mm diameter wire, and the distance between hangers is controlled within 1200mm.

3, the installation of the main meridian: the main keel is generally selected C38 light steel keel or supporting the main keel, spacing control in the 1200mm range. When installing, it is connected with the main keel's hanging piece and the suspender.

4. Install the side keel: Fix the edge keel around the wall with cement nails (or drill with impact drill). The distance between cement nails is not more than 300mm.

5. Install secondary keel: According to the specification size of the aluminum buckle plate, install the sub keel matched with the plate, and suspend the secondary keel on the main keel through the hanging piece. When the length of the secondary keel needs multiple continuous extensions, the secondary keel connection is used to connect the secondary keel and the opposite ends are connected and fixed after straightening.

6. Install the metal plate: When the aluminum pinch plate is installed, a reference line shall be pulled perpendicular to the keel direction in the middle of the assembly area, and the reference line shall be installed on both sides. When installing, take it lightly and gently, and then press the sides of the square board gently in the order of the flanging parts.

7, with the keel, you can in its supporting main keel and hanging ribs connected fixed, the buckle plate directly up.

8. Cleaning: After the installation of the aluminum buckle plate, it is necessary to wipe the plate surface completely with a cloth, and no dirt or fingerprints are allowed.