539) {this.resized=true; this.width=539;}" border=0>
1, do not buy color floor: Now a large number of color floor flooded the market. First of all, some businesses use b-level boards to charge a board or 1/3 a board to add 2/3 b-level board. Because b-level boards have bug eyes, double colors, and white edges, they need to use putty. And color patching, and to make you see that this is a patched board, they only paint on the board surface, do a good job in the notch and the back of the color, so you can not see this is a colored board, and Small color difference, the board is also very beautiful. After adding the color floor to the pavement, after a little time, problems such as cracking, cracking, etc. will occur, and if it is polished and repaired, the floor will become flowery due to coloration and shedding. When you buy the floor, you first look at it to see if the floor texture is clear, if there is a normal color difference, the floor is sawed open, the side is painted with water, and the kanban sub-primary colors are the same. If the difference is large, it is a colored board.
2, buy the floor should pay attention to notch and thickness, these two points are critical, the standard thickness of the floor should be 18mm, but the market has a lot of 17.5mm floor, not that poor 0.5mm floor effect will be affected, the key is 17.5mm floor is mostly less than the thickness of the plate or bending plate restructuring, and most along the bending plate due to poor drying caused by the problem is not solved, such as the performance of the floor after the paving arch, corrugated and so on. The slot length is another method of cutting corners. Because the floor area is calculated based on the width and length of the board, the shorter the slot of the manufacturer's product, the wider the board surface. This will reduce the cost and damage. The interests of consumers, and the floor slot is short, it is easy to produce noise, the floor stepping on it will make a buzz. Regarding the notch, the national standard is 3.5mm-4mm, you can measure it. If it is not convenient to measure, you can put two boards together and hold one, and the other is suspended at an angle of 45 degrees to see if another one will fall. If it falls, it is likely that the slot length is insufficient.
3, pay attention to the difference between paint: Now the paint on the floor market is generally pu lacquer and uv paint two, when buying the floor must be sure to ask the paint type, do not buy pu paint floor, its benzene and formaldehyde emission are very High, paint life is very short and has been banned in Europe and the United States. Now the domestic market has been replaced by uv paint, as uv paint is divided into two kinds, one is the ordinary bright surface coating uv paint, one is roller uv paint is some manufacturers advertised as super wear-resistant paint. Applying uv paint requires frequent waxing. The paint life is usually 2-3 years. The roller uv paint is generally matt effect. The surface is pockmarked. As for the super wear resistance of the paint, it is generally added in the paint. Aluminum oxide powder, this is an important indicator to distinguish ordinary roller paint and super wear-resistant paint, pay attention to product identification at the time of purchase.
4. Recognize the name of the floor: No matter what floor you buy, you must let the manufacturer specify the floor name on the invoice and sales slip. This can also prevent cheating. Once you find a problem with the name, you can make a claim. For example, teak, teak wood is a very valuable timber, but manufacturers to make money, such as teak Wang is actually picking Yamu, Brazil teak is actually a lot of similar names such as lotus leaf, actually they have nothing to do with teak, luxury, stability The sex is worse than teak, but the color and pattern are slightly similar.
5, do not buy package products: Now many floors do not have factories, only registered brands, in other manufacturers processing, packaging their own brands, quality can not be guaranteed. The method of identifying such floor traders is to first look at the location of the packing box, pay attention to the manufacturer's telephone number when buying, and verify the manufacturer. This is mainly when buying laminate flooring and multi-layer solid wood composite flooring.
6. Differences between German technology, German equipment and German manufacturing for the appearance of laminate flooring: German technology production: All laminate floors can be referred to as German technology because laminate flooring originated in Germany and Germany is the main producer and equipment for laminate flooring. Supply country. German equipment, that is, the use of some or part of Germany's mechanical equipment to produce the floor. Originally imported from Germany, the way to explain this is mainly to look at the "madeinGermany" (made in Germany) logo on the back of each floor instead of "Germanyteach" (German technology). The same must be on the packing box, and there must be customs import orders and inspection reports, which are generally available from importing companies. The price of imported German flooring is generally lower than that of some big brands in the Mainland. This is because Germany is a large quantity of pure products. Mechanized production.
7, correctly identify the floor life and cost-effective: strengthen the floor, the useful life of about 10-15 years, multi-layer parquet, the grade is almost the same with the laminate floor, in Europe is the same grade, the difference is more like solid wood flooring, because it is The plywood is made of veneer, so the environmental protection is more difficult to control and the service life is the shortest among all floor types. When buying solid wood flooring, care should be taken in light-colored flooring. There are many types of raw materials in light-colored flooring. The performance of raw materials is unstable. For example, Paluru, milk mulberry, ivory wood, iron eucalyptus, oil and nutmeg pods are all prone to problems. There are still some manufacturers who have developed many unsuitable wood floors for profit in order to pursue profits, and should be treated with caution. Three-layer solid wood flooring is the cutting-edge product in the floor. His high technological content and the most complex production process basically solve the problem of deformation and environmental protection of the floor, and has a long service life but high prices.
8, how to see the test report: Now on the market test reports are mostly sent inspection reports, that is, manufacturers take a few samples sent to the quality inspection department to detect the report, the quality inspection department only responsible for the submission of samples. At the time of purchase, ask the seller to show the floor certificate and the floor should be OK.
9. Which furniture to buy? This will avoid wrangling between the contractor and the floor supplier.
10, alert sales aftermarket tricks: floor in the procurement process is completed, the manufacturers delivery, home installation phase, this stage also have to be careful, many unscrupulous businesses will use the trick to fool the consumers.
Nature floor del floor paint door prices formaldehyde home improvement
Premium Nature Series Wood Flooring
Premium Nature Series Wood Flooring,Wooden Flooring Engineered,Multi Layer Plywood Flooring,Multi Layer Wooden Flooring
Jiangsu Zhenrui Furniture Material Co., Ltd. , https://www.zrfloors.com