The installation position of the distribution box of the tile press equipment: It should be installed in an easy-to-operate position for easy maintenance.
The leakage circuit breaker shall be installed in the distribution box. The leakage current shall not exceed 30ma, and the overload and overvoltage protection functions shall be provided. The points shall be routed and the lighting, air conditioning and socket shall be separately controlled. The loop shall ensure the normal use of the load. The bottom of the box should be 1.8 meters wide from the ground. The position of the original distribution box is generally not shiftable. If it is necessary to shift it, a transition box shall be added. The design and supervision shall be used to determine the plan. The construction can be carried out under the guidance of supervision.
The use of special Zhongcai pvc flame-retardant wire tube, wire tube must be fixed in the line slot, the line box and line pipe should be used when the lock mother, straight tube every 80 cm using a tube card, use a corner every 20 cm Tube card.
For the use of tile presses, attention should be paid to the following events: 1. The electrician must understand the type of line and equipment of the workshop and the performance of the equipment is not clearly understood and cannot be used riskily.
Second, the electrician must set the time to check the status of the motor and the electric control console. In the case of inspection, it must be promptly handled. In the case of checking the motor's power, check that there is no electricity before checking according to the back of the hand.
Third, in addition to the temporary construction of electricity, there are measures, it is not possible to hold a temporary line, can not be hanging lights, tools and welding equipment, such as the use of a smooth outlet, the previous line can not be arbitrarily changed.
Fourth, according to the delineation of his products on schedule inspection and nursing, not using the electrical product line to be completely removed.
Professional Aluminum Machined Parts manufacturer is located in China, including Sheet Metal Parts Stamping,Decoration Lamp Accessories,Casting Decoration Lamp Accessories, etc.Aluminum Machined Parts,Sheet Metal Parts Stamping,Decoration Lamp Accessories,Casting Decoration Lamp Accessories
Aluminum Machined Parts,Sheet Metal Parts Stamping,Decoration Lamp Accessories,Casting Decoration Lamp Accessories
JIANGSU TONGDE INTERNATIONAL TRADE CO.LTD. , https://www.jstongdetrade.com