After years of development, the flooring industry in China has undergone major changes in brand building, production processes, and technical quality. In particular, driven by a group of brand enterprises that stress quality and integrity, the operating environment of the entire floor market has improved significantly. However, with the changes in the international economic environment, the prices of domestic timber raw materials have soared and the production costs have continued to increase. The flooring industry is facing unprecedented cost pressures. In order to reduce costs, some companies have shoddy and inferior products, such as two-color plates, transfer plates, plywood, thin back plates, and short-lived plates (referred to as “five ghosts†products).
Scholarly aesthetic floor
"Five Ghosts" products are products that look similar to solid wood floors, but are subject to quality problems because of poor product specifications. By tearing off the veil of "Five Ghosts" disguise, it is easy to find the essential difference between them and solid wood flooring: genuine wood flooring is a high-quality floor made from paint directly on the floor processed with the core material of logs. "The floor is made of inferior flooring produced by a variety of camouflage methods. It is either used high-quality wood veneer with poor quality wood, or wood with defects such as wormholes, spotted spots, or the like is "cooked up" by transfer patterns on the surface, or With different lengths of short boards made by splicing. Due to the product's "bornness" defect, it is easy to cause arching, deformation, cracking, and fracture after the pavement is installed, or the use of a lot of adhesives causes household life to be unfriendly.
How can consumers avoid "five ghosts" when buying flooring? The first is to use large brands of flooring as much as possible, and the production and management of big brands is more standardized. The second is not trying to be cheap for a moment. As the saying goes: “One price for one product.†When there is a big difference between the price of a flooring product and the market price, consumers must maintain rational consumption. The third is to carefully observe the characteristics of the product, compare the texture or saw the floor to see the inner quality. There is a big gap between the surface of the "five ghosts" and the interior of the floor, which can be distinguished by comparison.
1. Two-color board: take the wood sapwood and core material transfer part as a solid wood substrate, the floor surface through the use of color or special color modification treatment, eliminate the color difference between the sapwood and the core material, in order to act as a high quality solid wood floor sales deceive consumer By. Because the air-dry density, moisture content, and wood hardness of the sapwood and the core material are different, a series of quality problems such as arching, deformation, and cracking of the floor easily occur.
Identification method: sanding the floor surface or sawing the floor to see the end face will show a very serious color.
2. Adapter plate: The use of some tailings, lower board and solid wood floor boards of different lengths spliced ​​together and acted as a solid wood floor to deceive consumers. This kind of floor is spliced ​​with a large amount of adhesive glue. The high formaldehyde content is not environmentally friendly, and it is easily deformed and cracked due to uneven stress in the floor.
Identification method: longitudinal sawing or grinding saw visible finger joint marks.
3. Plywood: Put 0.05mm-2mm thick solid wood veneer on a poor quality solid wood substrate to deceive consumers by acting as sales of pure solid wood flooring. This kind of floor is caused by unstable quality because of being selected from poor quality base materials, and the use of adhesive glue to press veneer and inferior wood together will easily cause peeling of veneer and base material, and there is a certain amount of formaldehyde content that is not environmentally friendly.
Identification method: can be identified by comparing the observation of the floor surface and bottom surface, solid wood floor surface and the ground of the wood grain is basically the same, but the plywood is completely different.
4. Transfer board: Defects consumers by acting as wood floor sales in wood defects such as wormholes, variegated spots, and cracks. The transfer board is mostly made of inferior grade B wood as the substrate, the floor quality is not stable, the wood grain is not natural, and it is similar to the laminate flooring. At the same time, the paint surface is easy to fall off and crack due to less paint coating processes.
Identification method: can be identified through the surface of wood, solid wood flooring natural wood grain, transfer board surface wood grain are the same, basically no color, the back and front of the wood is completely different.
5. Short-lived board: wooden floor is a kind of modern industrial products with high production process requirements and a certain technical content. Some companies, due to their own conditions, are unable to meet the national standards in terms of paint adhesion, paint hardness, etc. The lack of control over the water content results in deformation, paint peeling off, and scratching on the surface after a short period of time.
JS common greasy nature floor del floor paint formaldehyde door prices home
Bathroom Faucet,Basin Faucet Bathroom,Bathroom Mixer Tap,Wall Mount Mixer Tap
kaiping aida sanitary ware technology co.,ltd , https://www.jmkpaidafaucets.com