The detection of the horizontal axis tolerance with high precision requirements needs to be tested by special equipment. Therefore, it is recommended to use the roundness test method to detect the roundness of the shaft system to ensure the accuracy of accuracy. Through the processing and its measurement results, it is proved that the improved processing method is feasible. Through the verification of the assembly, it is proved that the improvement of the structural processability is successful, and the processing method is reasonable, thereby ensuring the quality of the product and meeting the structural functional requirements of the design.
For example, in the maintenance of a machining center in a unit, other machining centers in this unit can work as usual. For safety reasons, if the Gantry robot is in use at this time, the unit control will ensure that the gantry robot cannot load and unload the machining center that is undergoing maintenance, so as to avoid danger to the operator/maintenance personnel. For example, the process OP30 has six machining centers, and the output is 83% when maintenance is performed on one machining center. In order to ensure that the front and rear units can still have 100% production, there must be a buffer zone (reserve) between each unit. In normal production, the buffer should be half full. For example, #4 unit is being maintained, while #3 unit can still be produced at 100%, so that #3 and #4 should be able to store 17% of production until maintenance is over. The #5 unit still maintains 100% throughput because it can get artifacts from the buffer between #4 and #5. If in the automatic line, maintenance of one machine will stop the entire line.
The design and production of the parts are closely linked. Therefore, in practice, we must do an organic combination of the two, design a good product that meets the requirements of use and is easy to produce.
PCBN Cutting Tips(Pieces)
PCBN chips are welded to the inserts for machining cast iron.Bohong New Materials can supply different shapes of PCD cutting heads according to customer requirements and we are happy to provide consulting services for product applications.
The wear resistance, impact resistance and stability of BOHONG PCBN tools (which can withstand high temperature over 1000 degrees) can fully meet the metal cutting requirements.
Pcbn Cutting Tips(Pieces),Pcbn-Polycrystalline Cubic Boron Nitride,Pcbn Blanks For Cutting,Pcbn Pieces With Different Shapes
Henan Bohong New Material Co., Ltd , https://www.bohongpcd.com