During the Spring Festival, fire safety at home has become an important focus. According to statistics, 25% of fire accidents each year belong to family fires, and half of them occur during the winter and the Spring Festival. In the past week, many home fire accidents have occurred across the country. Among them, the frequent use of various heating devices in winter and improper handling of home improvement materials are the main reasons for frequent home fires in winter.
According to experts, furniture furnishings in the living room, such as curtains, mats and electrical equipment, should be especially careful in winter. For example, cushioned furniture tends to be smoldering with unburned cigarette butts. This phenomenon is not only concealed and difficult to detect, but is more likely to produce deadly smoke. Therefore, it should be carefully checked before leaving the home or going to bed. The living room air conditioning should be kept away from flammable curtains, because the curtains are the main medium for the spread of window air-conditioning fires, so the air-conditioning should be placed to avoid curtains, or the use of flame-retardant fabric curtains; air conditioning should always be kept clean, air filters are also Should be cleaned regularly. If any smell or smoke is heard during air-conditioning operation, it should be turned off immediately. Non-professionals should not open it easily. It is best for professionals to regularly clean the air-conditioner. When not in use, it is best to unplug the power supply to avoid If the line is overheated, do not allow the power cord to come in contact with water and other conductive media to prevent electric shock. The air-conditioning bracket should be made of non-flammable materials. When installed, it should be high, low, and slightly inclined to allow moisture to escape to the outdoors. , To avoid moisture damage to air-conditioning components.
Behind the flat-screen big TV, there should be enough space to dissipate the heat generated inside the machine and unplug it when not in use. To avoid overloading the circuit, do not connect multiple appliances on the same line. Overloading will not only cause damage to the insulator due to overheating of the wires, but also cause fire in the insulator or nearby objects. Do not lay wires under furniture, under carpets, or other pedestrian traffic. At least once a year, check the electrical installations in your home.
The kitchen is the focal point of the family's fire prevention - daily use of open fire cooking and boiling water are in the kitchen. In addition, the kitchen is also the place where fuel, cooking oil and gas are used. Therefore, proper placement of fuel and careful use of gas stoves not only provide convenience for life, but also avoid fires and ensure safety. Do not stack debris around the cooker, such as waste paper or other flammable items. The stove should be cleaned regularly to ensure that no grease will accumulate. When using a range hood, the cooker must not be allowed to dry, so that a large amount of heat cannot be sucked into the hood, damaging the components, or even igniting the engine oil. At this time, professionals should be invited to clean the hood to prevent oil and water droplets from entering the circuit and causing a short circuit. Cannot clean the hood with flammable liquids.
Keep the air circulation around the refrigerator. The refrigerator should be placed in a ventilated place as much as possible. Do not place flammable or combustible articles around. The distance from the side of the refrigerator where the condenser is installed should be more than 10 cm away from the wall, and the air around the cabinet should be kept smooth. Allowing dust to accumulate on motors, compressors, and coils is the main cause of refrigerator fires. This situation can cause the motor to be overloaded and damaged, or the fire can ignite the foam insulation and other plastic components of the refrigerator. Pull out the plug regularly to remove dust from the motor, compressor, and coil.
When using a microwave oven to heat food, do not use a closed container to fill the food. Because the pressure in the microwave oven is too high, it can easily cause explosion. When the plastic bag is used to seal the food, it is necessary to cut out a corner as the outlet hole; when the food is not placed in the microwave oven, do not Start, use food in case of fire, do not open the door, you should immediately reset the timer to zero, or unplug the plug.
According to the data, fires occurred in the bedroom with the strongest lethality. Most of the people died of inhalation of harmful smoke. Since the bedroom's clothing, furniture, curtains, bedding, carpets, etc. are all flammable items, it is very important to do a good job of fire prevention in the bedroom.
In cold winter weather, heating devices such as heaters, electric blankets and hand warmers are often used in the bedrooms. When using the heaters, they should be placed in a stable manner. Never go near the bed or other flammable materials. Do not put the clothes on the heaters to dry them. . When using the electric blanket, do not rub and fold the electric blanket so as to prevent the electric heating element from being damaged or short-circuited. When sleeping, it is necessary to cut off the power in a timely manner to avoid a fire. The hand warmers cannot be charged for too long, and the temperature cannot be too high, otherwise they will explode easily.
In the decoration process of a home, not only practicality and aesthetics should be taken into consideration, but also safety should be taken into account, and flammable materials that will generate a large amount of smoke or toxic gases during the combustion process should be avoided to minimize the risk factor. In home renovation, furniture, doors and windows, partitions, false walls, etc., are all required to be used for the production of panels. It can be said that the panel is one of the most important and most used materials in home decoration. Therefore, the fire protection of the decoration plate is an important part of the fire protection.
Most households have access to water, electricity, and gas during indoor decoration. During the renovation process, try not to modify the gas pipelines for convenience, aesthetics, and practicality. If you need to make changes, you must follow the relevant regulations and ask professionals to install them. At the same time, when performing construction near the gas pipeline, special care must be taken not to damage the pipelines and valve switches in order to avoid gas leakage and fire or explosion.
(For more information on plate, please pay attention to China Plate Trading Network /)
A sensor faucet is an advanced automatic sensing device that detects hand movements and controls the flow of water through built-in sensor technology. It is an essential component of modern sanitary facilities and finds wide applications in public spaces, commercial buildings, and residential environments.
Applications:
Sensor faucets are widely used in various settings, including but not limited to:
- Public Spaces: Airports, hotels, shopping malls, hospitals, schools, etc., providing convenient and hygienic handwashing experiences.
- Commercial Buildings: Office buildings, restaurants, cafes, etc., offering efficient and water-saving faucet solutions.
- Residential Environments: Increasingly, sensor faucets are being adopted in households to enhance quality of life and hygiene standards.
Jiangmen Faer Sanitary Co.,Ltd , https://www.faersanitarys.com