Solve the problems related to steel radiators

Sales Director Guo Jinfeng can help you solve the problems related to steel radiators: As we all know, the media that provide heat for the radiators are mainly water and steam, but the family generally uses water for heating. The corrosion of steel contained in oxygen is a major problem that steel radiators have been difficult to solve. It requires oxygen content in water not more than 0.1mg/m3, pH=10~12. Although the hot water used in the radiator is required to be deoxidized, most of them are difficult to implement; and for some reason, large-area central heating The method cannot seal the whole system, which makes it impossible to be isolated from oxygen. In addition, the water supply is not maintained after the heating is stopped. Thus, the oxygen content in the system exceeds the standard, and oxidative corrosion cannot be avoided, especially in the humid state. more serious. Sales Director Guo Jinfeng suggested that you must pay attention to the quality of the radiator when purchasing the radiator. Safety is very important. The North Recording Tree Radiator is the top ten brand in the radiator and is worthy of consumers' trust! If you have any questions, please call for help!

Global hardware network

Concerned about surprises

Tags: radiator sheet steel sales director oxidation corrosion water and steam

Previous: The secret of corrosion resistance and non-aging of steel radiators Next: Inventory of China's hardware industry development highlights in 2011

Water Level Sensor

Water level sensor, alose called hydrostatic pressure level sensors, submersible level sensors, which are submersible level sensors used for measuring the level of liquids (including corrosive liquids) in deep tanks or water in reservoirs. It provide accuracy and reliability across a wide range of applications. Based on the principle that the measured liquid static pressure is proportional to the height of the liquid, the advanced isolation type diffusion silicon sensor or ceramic capacitive Pressure Sensor is used to convert the static pressure into electrical signals, and then through temperature compensation and linear correction, into standard electrical signals (generally 4-20mA/1-5VDC).

water tank level sensor, pressure level sensor, submersible level sensor, hydrostatic level sensor, water Level Transmitter

Xi'an Gavin Electronic Technology Co., Ltd , https://www.cngamicos.com

This entry was posted in on