First of all, you should pay attention to the cleaning and maintenance of the furniture surface. The surface of solid wood furniture is painted with paint, which is especially important for the maintenance and maintenance of the paint film. Once the paint film is destroyed, it not only affects the appearance, but also further affects the internal structure of the product, so the furniture should always be kept clean. Wipe the dust on the surface of the furniture with a soft cotton cloth every day. At regular intervals, wipe the dust from the corners of the furniture with a damp cotton cloth that has been wrung out of moisture, and then dry it with a clean dry soft cotton cloth. . In normal times, after drying, you can also apply a thin layer of high-quality light wax to the furniture, and gently rub the gloss like a leather. This not only maintains the solid wood furniture, but also increases its brightness, but the use of light wax must be careful, and must not use inferior products containing chemical corrosion components.
Second, avoid removing stains with alcohol, benzine or other chemical solvents. If there are stains on the surface of solid wood furniture, do not rub it hard. Use warm tea to gently remove the stains. After the water evaporates, apply a little light wax to the original part, then gently grind several times to form a protective film. Usually, be careful not to let hard metal products or other sharp objects collide with the furniture to protect the surface from scratches. In addition, in the summer, such as indoor flooding, it is advisable to use a thin rubber pad to separate the furniture from the ground, and at the same time keep the wall of the furniture at a distance of 0.5-1 cm from the wall.
In addition, solid wood furniture should be kept away from heat and direct sunlight. In the winter, it is best to place the furniture about 1 meter away from the heating flow to avoid long-term baking, thus preventing local cracking and deformation of the wood. Outdoor sun protection should be avoided as far as possible for the whole or part of the furniture for a long time. It should be placed in a place where it can escape from direct sunlight or be separated by a transparent tulle curtain.
Trojan material technology co., Ltd is China metallographic precision sectioning machine Manufacturers and metallurgical precision sectioning machine suppliers, High quality, factory direct sales,metallographic grinding All kinds of grinding and precision cutting machines and slice saw equipment for metallographic testing. Sample preparation for microscopic examination begins with a reduction in quality. Suitable equipment has a firm and stable appearance to minimize the depth of sample surface deformation. Grinding saws and precision saws save time by limiting the number of steps required to analyze samples after slicing. Find the right sharpening, Precision Cutting Machine or slicing consumable product for your material testing application below.
Equipment to meet various cutting needs
Fast and accurate cutting requires carefully developed equipment and consumables. We offer a complete range of cutting machines, gripper tools and cutting wheels, all designed to ensure convenient, efficient and deformation-free cutting for a wide range of workpiece sizes.
Manual, automatic and semi-automatic machines
Machine suitable for all workpiece sizes and requirements
Floor stand and table top machines
Cutting Equipment,Metallurgical Cutting Machine,Cutting Machine Metallography,Sample Cutting Machine
TROJAN (Suzhou) Technology Co., Ltd. , https://www.troolymaterial.com