The self-leveling floor paint has the advantages of good adhesion, high mechanical strength, low shrinkage of the paint film after curing, and the ability to be coated into a thick film at one time, and is therefore widely used in the finishing of modern industrial floors. Next we will have a deep understanding of the self-leveling floor paint .
[What is self-leveling floor paint]
For general flooring coatings, it is difficult to meet the stringent requirements for high cleanliness sites in the GMP specification. It is formulated with 100% solids special epoxy resin as the base material. It is environmentally friendly, has a high gloss, and has a one-time film thickness. The excellent properties such as toughness and wear resistance of the paint film are the ideal floor coating systems for places such as electronics factory buildings and pharmaceutical factories.
[Classification of self-leveling floor paint]
Self-leveling floor coatings can be divided into two types, solvent-based and solvent-free. Solvent-based epoxy self-flowing floor coatings emit large amounts of volatile organic compounds (VOCs) during the production, construction, and curing processes. These volatile organic compounds not only affect people's health but also cause environmental pollution. In recent years, the dangers of volatile organic compounds (VOCs) have attracted the attention of governments of all countries, and relevant laws and regulations have been issued to limit their emissions. Therefore, solvent-based epoxy turf flats have not become the best choice for manufacturers. The development of solvent-free epoxy gravity floor is a general trend. Solvent-free epoxy floor coatings adhere to the concept of environmental protection, with no emissions of volatile organic compounds. The coating not only has excellent chemical properties such as water resistance, oil resistance, chemical resistance, etc., but also has the advantages of good adhesion, high mechanical strength, low shrinkage of the film after curing, and the ability to be applied as a thick film at one time, and is therefore widely used. Used in the finishing of modern industrial floors.
Self-leveling floors also include epoxy anti-static self-leveling floors and colored sand self-leveling floors.
Performance characteristics
[Advantages of self-leveling floor paint]
Self-leveling floor paint is a kind of epoxy floor. Self-leveling is also the best kind of floor, its characteristics: high cleanliness, stain resistance, and sterility.
1, using solvent-free high-quality epoxy resin and curing agent formulated.
2, the surface is smooth, beautiful, mirror effect.
3, resistant to strong acid, alkali, salt, oil corrosion, excellent alkali resistance.
4, wear, pressure, impact resistance, high degree of cleanliness.
[self-leveling floor paint construction process]
1. Ground treatment: Polish, repair, decontaminate, and remove dust according to ground conditions.
2. Epoxy Primer: It adopts special primer with strong permeability and adhesion, strong epoxy primer, enhanced surface adhesion
3. Epoxy mortar layer: The epoxy bicomponent is added to the quartz sand and uniformly coated with a guillotine blade to enhance the impact resistance of the ground.
4. Epoxy putty layer: Put a proper amount of putty powder with epoxy two-component and spread evenly with a guillotine knife.
5, self-leveling paint: evenly coated with self-leveling epoxy finish.
6. When the floor is put into use: It is subject to 25 degrees of exposure. After 24 hours, it can be on the person, and after 72 hours, it can be pressured.
Summary: The above introduces the self-leveling floor paint , and we hope to help everyone.
Floor paint
Yantai Ciso Lubrication Technology Co.,LTD , https://www.cisolubrication.com