Rolling bearing English comparison

Source: China Bearing Network Time: 2014-03-27

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Rolling bearing English comparison below lists some of the corresponding bearings in the rolling bearing; and note the explanation.
Rolling bearing
A bearing that rolls (not slides) between parts that accept loads and move relative to each other; it contains parts with raceways and a roll set with or without barriers or guides.
Single row (rolling) bearing
Rolling bearing with a row of rolling elements.
Double row (rolling) bearing double row (rolling) bearing
Rolling bearing with two rows of tumblers.
Multi-row (rolling) bearing multi-row (rolling) bearing
Roller with more than two rows; roll bearing that accepts loads in the same direction.
Full complement (rolling) bearing full complement (rolling) bearing
No cage bearing; the total circumferential clearance between each row of rolling bodies is smaller than the diameter of the rolling body; and the total clearance is small to provide a satisfactory bearing function.
Angular touch (rolling) bearing angular contact (rolling) bearing
Nominal touch angle greater than 0 degrees; but less than 90 degrees of rolling bearings.
Rigid (rolling) bearing
A bearing that does not coincide with the axis of the impedance raceway.
Self-aligning (rolling) bearing
A raceway is spherical; bearings that adjust the point of view error and angular motion between the axis of the raceway.
External aligning (rolling) bearing external-aligning (rolling) bearing
Use a spherical outer surface on the ferrule or washer to match the corresponding outer surface of the self-aligning race, the aligning seat washer or the seat hole; to adjust the roll bearing of the viewpoint error between the axis of the axial bearing housing.
Separable (rolling) bearing
Rolling bearings with separate components.
Non-separable (rolling) bearing
After the end of the device; the bearing ring can not be arbitrarily separated from the rolling bearing.
Split (rolling) bearing split (rolling) bearing
Both the ferrule and the cage are simplified devices when used; they can be divided into two half-circular rolling bearings.
Metric (rolling) bearing metric (rolling) bearing
The original design and shape and public service are basically indicated by the metric unit of the rolling bearing.
Metric series (rolling) bearing metric series (rolling) bearing
Rolling bearings that meet the ISO metric scale plan.
Inch (rolling) bearing inch (rolling) bearing
In the original design, the dimensions and the public service in inches indicate the rolling bearing inch series (rolling) bearing inch series (rolling) bearing
Rolling bearings that meet the ISO inch series scale plan.
Open type (rolling) bearing open (rolling) bearing
Rolling bearing without dust cover and sealing ring.
Sealed (rolled) bearing sealed (rolling) bearing
Rolling bearing with sealing ring on one or both sides.
Dustproof (rolling) bearing shielded (rolling) bearing
Rolling bearing with dust cover on one or both sides.
Closed (rolling) bearing capped (rolling) bearing
Rolling bearing with one or two sealing rings, one or two dust caps or a sealing ring and a dust cover.
Pre-smooth (rolling) bearing prelubricated (rolling) bearing
The manufacturer has filled the smoothing roller bearing.
Aircraft frame (rolling) bearing airframe (rolling) bearing
In terms of layout design and function; it is used for the layout of the aircraft; it includes the rolling bearing of the control system.
Instrument fine (rolling) bearing instrument precision (rolling) bearing

Recommend to friends comments close window

Bearing related knowledge

Fine SKF bearing device after the accuracy of the pain bearing rust disposal method specific analysis NSK imported bearing internal layout plane thrust bearing principle analysis Japan NSK developed low torque grease sealed bearings

This article links to http://
Please indicate the bearing network http://

Previous:Analysis of angular touch ball bearing series:Compilation of bearing fever common sense

Blue Green Algae Sensor

The blue green algae sensor uses the fluorescence method to measure the content of blue-green algae in the water. The 590nm light source excites the phycocyanin in the water to produce fluorescence, and the fluorescence intensity is measured at 650nm to calculate the number of blue-green algae in the water.Blue-green algae in water quality can reflect changes in water ecological environment. By monitoring the blue-green algae in the water quality, changes in the water ecological environment can be detected early, and corresponding protection measures can be taken to protect the stability and health of the water ecological environment. The protection level of the blue green algae sensor is IP68, the shell material is stainless steel, and the measurement range is 0-280000 cells/mL. The blue green algae sensor comes with a cleaning wiper, which can realize automatic cleaning underwater and reduce maintenance. You use this BGA sensor with our Blue Green Algae Controller to realize more functions.

BGA sensor

blue green algae sensor, blue green algae probe,online BGA sensor

Suzhou Delfino Environmental Technology Co., Ltd. , https://www.daruifuno.com