Plants, houses without walls. Large-scale factory cleaning and refurbishment projects are all more responsible. They usually need to hire a professional cleaning company to clean, because only the cleaning procedures and cleaning technology they provide can clean the interior and exterior of the factory. The following are the operations that the cleaning company implements without affecting the normal operation of the plant. If you have any needs in this area, you may wish to follow me to see what the plant cleaning content and cleaning steps are!
Plant cleaning content:
1, roof cleaning
The roof materials are mostly made of smooth surface materials, such as color steel plates, plastic plates, aluminum plates, and buckle plates, and can be wiped with dust-free cloths with strong adsorption force, and used with tools such as telescopic rods, seat belts, scaffolds, and tiger clips. Injustices and corners can be cleaned with an ultra-filter dust industrial vacuum cleaner.
2, wall cleaning
Wall materials are mostly made of smooth surface materials such as glass, color steel plates, plastic plates, aluminum plates, pinch plates, and stainless steel plates. It is possible to use a clean dust-free cloth or dust-free wiper to wipe the surface. Rods, tiger clips and other tools used, like the cleaning of the same as the uneven, the corner can be used ultra-filter dust vacuum cleaner.
3, the ground
Most of the ground materials are polyurethane paint, epoxy resin, artificial leather, and terrazzo. In order to effectively prevent ground material dust generation and improve the service life of ground materials, anti-static accumulation of wax water can be used for waxing. Wax surface with ultra-filter dust industrial vacuum cleaner or washing machine to scrub the floor.
4, facilities and equipment cleaning
Use a vacuum cleaner to vacuum or wipe it with a dust-free rag.
5, the tuyere, gaps, valves, lamps, doors and windows, pipe holes using ultra-filter dust industrial vacuum cleaner or wipe with a clean rag.
6, the use of detergents
Cleanrooms have strict humidity requirements. Wet washing should be avoided. Neutral detergents can be used when necessary, and as few as possible acidic or alkaline cleaners are used. Cleaners can eliminate static electricity even more.
Factory cleaning steps:
1. The cleaning company dispatches someone to conduct site visits and hear relevant requirements of Party A.
2. According to the site investigation and Party A's design and construction plan and budget.
3, partial proofing, Party A approved, signed a contract.
4. Prepare for admission in advance, including material procurement, tool admission, and special tool production.
5, employee safety education.
6, formal admission construction.
7. After the construction is completed, Party A shall pass the inspection.
8, return visit.
Decoration notice
1, pay attention to the ground material
The first part of the plant decoration is to consider the ground part, the general plant decoration floor does not need to bear the load, then you can consider using some inexpensive decorative materials, such as floor tiles or composite wood flooring to do the plant floor decoration materials, Some plants need to consider anti-static when decorating, then we must choose anti-static floor or anti-epoxy floor as the preferred material for the plant decoration floor, and some plants need to bear the ground loading load, then we must The ground base is made of concrete, and the concrete is divided into commercial concrete and soil practice. The former is slightly higher in cost but stable in quality. The latter is cheaper and of lower quality, and then it is laid on the concrete base with other hard textures. can.
2, a reasonable top design
In addition, the top of the plant decoration should also pay attention to the top, the top of the plant is usually higher, and most of them are steel frame. At the top of the decoration, we must first design the fire, ventilation, and central air conditioning reasonable arrangements, because these are The necessary hardware facilities in the plant decoration, especially firefighting. The next step is to determine whether the ceiling is suspended according to the requirements of the application. There are many materials for the ceiling of the factory. If you want to use it for the beauty, you can use mineral wool sound-absorbing panels, plasterboards, aluminum-plastic panels, etc. to decorate the top, and you can't do it. For any ceiling, it is also a modern, minimalist design to locally modify some facilities that need to be hidden or unsightly.
3, effective space division
The internal space division of the factory is mainly based on the actual use requirements of the operators to make reasonable use of space, if the plant area has a lot of equipment, it is not appropriate to set too many partitions and partition walls, try to use the ground tone or use some colored identification to carry out Divide the area, use the logo to divide the area to avoid too much color, so that not only the area is not clear but also feel dizzy, and some plants can be clearly defined equipment area and office area, such a plan is more common, because Easy to manage. Therefore, in designing such a plant, it is necessary to have a good grasp of the close integration of data with each space, and also to consider that the working distance between the equipment area and the office area is smooth, as well as dust and noise interference.
4, the use of reasonable layout
According to the specific area of ​​use for scientific purposes is the primary purpose of the general plant area is larger, then when the use of the function is divided into account taking into account the distribution of people and ventilation, fire exits reserved.
5, fire approval
For safety, do not neglect the installation of fire equipment. Before installing the fire protection facilities, you need to go to the local fire station for approval. After the completion of the project, you need to apply for approval. It usually takes about 10 days for the fire safety procedure to be submitted for approval. Therefore, before the renovation, the fire company should be consulted for this project.
6, the choice of partition
In the decoration process, there are often areas that need to be properly divided into different functional areas. This requires the use of partitions of different materials to divide. Currently used partitions are generally: light Steel Keel plasterboard partitions, stainless steel glass partitions, aluminum plastic Tempered glass partitions and pure tempered glass partitions, these partitions can play a role in the division, but the style represented is different, the price is not the same, including light steel keel gypsum board partition lower cost, often easily accepted .
7, the choice of floor materials
The ground in the factory building is very important. Because there is a lot of wear every day, try to choose some durable materials. If there is a need for ground bearing, it is better to lay a layer of concrete on the original ground. For some plants that need static electricity, the ground should be suitable. Laying anti-static flooring or anti-static pvc and other materials, there is a kind of more wearable ground material called "terrazzo floor", this kind of ground is more economical and practical, but with the emergence of new plant floor materials, this product is not how People are interested.
8, the choice of top material
Mineral wool sound-absorbing panels and calcium silicate boards are materials commonly used in plant decoration. These materials are low-priced, light-burning, and easy to operate. They are generally recognized by consumers, and it is worth noting that no matter which type of material is used The top material needs to be mainly matched with the firefighting facilities. Usually the ceiling keel is used first. Then the firefighting project begins to install the spray and smoke plumbing facilities. After the ceiling material is completely capped, the firefighting facilities will be used for the final spraying. And smoke detector installation.
Editor's summary: The above is the content of the plant cleaning and the steps of the safety warning: the plant is prone to fire hazards related to the introduction, hoping to help meet the needs of friends! For more information, please continue to follow our website, follow-up will show more exciting content. You can also purchase more of your favorite products on Qijia Mall!
Factory Waterproof Workshop Sliding Door Factory Feng Shui Factory Color Steel Sandwich Panel Partition Partition
Stainless Metro Rail Roll Forming Line
Roll Former,Stainless Metro Rail Roll Forming Line,Sheet Roll Forming,Rail Roll Forming Line
Xinxiang Tianfeng Machinery Manufacture Co., Ltd. , https://www.frollforming.de