Speaking of the kitchen, we have to mention the cabinets, cabinets are basically indispensable in the current kitchen decoration, but the kitchen is always filled with pots and pans, rice and oil, crowded, messy to make our kitchen terrible. Since the kitchen basket has appeared, it has become very easy to store, so how to choose the kitchen basket?
"Ask"
1 wire
The wire thickness and surface quality directly determine the material cost of the basket. Low-priced products from small manufacturers often cut corners in this area – the diameter of the peripheral wires is not much different (6MM), the diameter of the wires is fine (usually only 2 to 3 mm) and the number of rows is small, and the structure is also very simple. The method of identification is very easy: each of the left and right hands is provided with a basket basket (without rails), and the light weight is reduced. In addition, the quality of the surface of the wire will affect the subsequent plating. The surface of the wire with good quality has no blisters, pinholes, and no unevenness after plating. The core diameter of the main frame of the cabinets such as “Weidiâ€, “Bai Lilong†and “Weidi Emperor†reaches 8MM to 10MM, the skeleton line is 5.5MM--6MM, the bottom cable reaches 3.5MM, and the bottom line distance Tightly arranged. The structure design is scientific, novel and humanized. The wire is made of low carbon steel produced by Baosteel and processed into different wire diameters through 22 steps. The surface of the wire is smooth without blisters and pinholes. No unevenness.
2 plating
Electroplating is the most important part of the quality of the basket. Because the kitchen environment is relatively humid and there are some corrosive foods such as oil, salt and vinegar, it is decided that the basket should have certain anti-corrosion and anti-rust ability. "Wei Di", "Bai Li Long", "Wei Di Huang" and other brands of cabinet pull basket plating through 18 processes up to 8 levels of 72 hours of salt spray test, anti-rust ability in the same industry from the industry's electroplating standards
3 rail
The good drawing effect of the guide rail is obviously different. The guide rail with unqualified quality is easy to rust, the pulling is not smooth, and it is easy to deform after the heavy object is placed. "Weidi" "Bai Lilong", "Weidi Emperor" and other basket chrome chrome series use BLUM and Taiming rails, stainless steel chrome series adopts Taiwan locomotive guide rails, which are stable and smooth, and can be pulled continuously for 100,000 times. Corrosive performance, up to 8 levels of 24 hours salt spray test.
"Two look":
1 look at the appearance
The appearance should be neat and uncluttered, the four corners are 90 degrees, the four-sided frame should be balanced, the bottom material should be evenly arranged, the surface should be uncoated, the hand feels comfortable, and there is no burr. In the production process of the cabinets of the brands such as “Weidiâ€, “Bai Li Long†and “Wei Di Huangâ€, 800 pieces of fine sand polishing were used in each exposed thread. There is no pulling and hooking in the wirestock; a large number of T-weld and fixtures are used, and each production process is strictly self-tested to ensure that the dimensions, workability and parallelism of the semi-finished and finished products meet the design standards.
2 look shiny
The color should show the unique temperament of stainless steel ------ silver-green mirror surface light. The mirror is bright and beautiful, such as the stainless steel series of the “Dafa (DF)†brand. If the surface treatment process is not advanced, the surface silver ash is blurred (matt), which seriously affects the appearance, the grade is low, not exquisite, not noble.
3 look at solder joints
The solder joints of the basket should be full, without solder joints, and the solder joints should not be too large. Too large and ugly, and mostly for solder joints, not firm, should be slightly smaller than the size of the two materials themselves.
"Three pulls":
The most important part of the basket is the guide rail. Whether the guide rail is smooth when pulling, and bears a certain load-bearing capacity, the material is thicker, smooth, and has a good combination and low noise. The “BLUM†and “Taiming†guide rails used by “Weidiâ€, “Bai Lilong†and “Wei Dihuang†are good for bearing weight, and can fully pull out the load of 40kg. The noise in the silent room is less than 2dB.
Carbon steel nut is a common fastener, which is made of high-quality carbon steel material, which has the advantages of high strength, corrosion resistance and wear resistance. Carbon steel nuts are widely used in machinery, construction, automobiles, aerospace and other fields, and are an important part of various mechanical equipment and structures.
Carbon steel nuts are produced according to international standards, with precise dimensions, smooth surface and easy installation. It can be used in conjunction with various bolts and screws to form a fastening device to ensure the stability and safety of machines and equipment. Carbon steel nuts can also be customized according to the needs of customers to meet the special requirements of different fields.
Our carbon steel nuts are reliable in quality, reasonable in price and considerate in service. We have advanced production equipment and technology, strict quality management system to ensure product quality and stability. Both our sales team and after-sales service team have rich experience and professional knowledge, and can provide customers with a full range of services and supports.
If you need carbon steel nuts or other fastener products, please contact us, we will serve you wholeheartedly. We believe that our products and services will bring more convenience and safety to your work and life.
Carbon Steel Nut,Carbon nuts,Carbon steel hex nut,Carbon steel nuts
Taizhou TS HARDWARE Co., Ltd , https://www.shuwengroup.com