Generally referred to as the external quantum efficiency of a component, it is the product of the internal quantum efficiency of the component and the extraction efficiency of the component. The internal quantum efficiency of a component is actually the electro-optic conversion efficiency of the component itself, which is mainly related to the characteristics of the component itself (such as the energy band, defects, and impurities of the component material), the composition and structure of the component. The extraction efficiency of the component refers to the number of photons that can be measured outside the component after the photons generated inside the component are absorbed, refracted, and reflected by the component itself.
Therefore, the factors concerning the extraction efficiency include the absorption of the component material itself, the geometry of the component, the refractive index difference of the component and the packaging material, and the scattering characteristics of the component structure. The product of the internal quantum efficiency of the component and the extraction efficiency of the component is the luminous effect of the entire component, which is the external quantum efficiency of the component.
Early component development focused on improving its internal quantum efficiency. The main method is to improve the quality of the barrier crystal and change the structure of the barrier crystal, so that the electrical energy is not easily converted into thermal energy, thereby indirectly improving the luminous efficiency of the LED, thereby obtaining a theory of about 70%. Internal quantum efficiency, but such internal quantum efficiency is almost close to the theoretical limit. Under such circumstances, it is impossible to increase the total amount of light of the module by increasing the internal quantum efficiency of the module. Therefore, it is an important research subject to improve the extraction efficiency of the component. The current methods are mainly: changes in grain shape - TIP structure, surface roughening technology.
High Pressure Pump For Sweeping Truck
Botuo Pumps gearbox pumps are direct-drive high-pressure pumps that can be easily mounted on standard gas or diesel engines from 104-107 horsepower. The gearbox drive has a 3-ratio allowing the pump to run at half the speed of the engine. This configuration provides a compact assembly without running the pump at high engine RPM. The gearbox is completely sealed, offering protection against rain, dust, and humidity. BOtuo Pumps gearbox pumps arr in High Pressure Street Cleaning High Pressure Cleaning Car Washing, Boiler, Vessel Cleaning due to superior product life and ability to perform well in continuous duty use.
Gearbox Low Pressure Plunger Pump,Triplex Plunger Pump Gearbox Drive,Gearbox Drive Triplex Plunger Pumps,Car Wash Gearbox Pump,Triplex Plunger Pump with Gearbox
Zhejiang Botuolini Machinery Co.,Ltd , https://www.chinaplungerpump.com