The Standing Committee of the National People's Congress of Kunming City held a press conference to reveal that in order to adapt to the new situation, the Standing Committee of the National People's Congress of Kunming City has revised the original regulations on urban roads, outdoor advertising, and motor vehicle passenger transportation. The three newly revised regulations have been approved by the 19th meeting of the Standing Committee of the 11th National People's Congress and will be implemented on New Year's Day next year.
Ad private car ads added, careful fine 20,000 habits in their own cars to advertise the main attention to the car, the newly revised "Kunming City Outdoor Advertising Management Regulations" regulate the use of motor vehicles to randomly publish outdoor advertising behavior : The use of public transport and operator-owned vehicles to publish body advertisements must be registered with the administrative department for industry and commerce and reported to the public security department for record. Other vehicles are prohibited from advertising body ads. Offenders shall be fined between 5,000 yuan and 20,000 yuan.
At the same time, Kunming’s ban on the establishment of pillar-type outdoor advertising in the urban planning area was also included in the new regulations this time, and it has risen to local regulations. The regulations clearly stipulate that it is forbidden to set up pillar-type outdoor advertising facilities within the scope of city planning areas of cities and counties (cities, districts). (In the campaign to rectify outdoor advertising in Kunming last year, 247 pillar-type outdoor advertisements were dismantled)
The new regulations also reflect the human side: If urban outdoor development or public interests require the dismantling of outdoor advertising facilities, they should notify the operator 30 days in advance and make compensation according to law.
In terms of administrative penalties, compared with the original regulations, the penalty rate has been increased by 2 to 10 times and the maximum penalty amount has reached 50,000 yuan. For example, outdoor advertisements must not contain false content, deceive and mislead consumers, or they will be fined not less than 10,000 yuan but not more than 50,000 yuan.
The passenger car will not be equipped with alarm monitoring equipment, and will be punished with RMB 5,000. With the comprehensive coverage and upgrade of technical measures for passenger transportation monitoring, the safety index of the motor vehicle passenger transport industry in Kunming will be further enhanced in the future. The newly revised “Regulations on the Administration of Public Security for the Motor Vehicle Passenger Transport Industry in Kunming†makes three changes to the original ordinance: the name of the original regulation is changed to “Regulations on the Administration of Public Security for the Motor Vehicle Passenger Transport Industry in Kunming†and the scope of application is the municipal administration. Regional passenger transport industry;
At the same time, it is stipulated that an alarm monitoring device that complies with national standards must be installed and used on passenger motor vehicles and on the field (station), otherwise a fine of 5,000 yuan will be imposed; however, radio intercom devices may not be installed on passenger motor vehicles without permission;
The new regulations also established a public security filing system, and provided that public security filings must not be charged. One of the core contents of the original regulation is the system of public security permit. To maintain the unity of the legal system, the new regulations will remove the permit system.
Underground pipeline network to be explored before road excavation Since the "Regulations on the Management of Urban Roads in Kunming" has been implemented since 1997, three revisions have been made. With the acceleration of urbanization, the original regulations have not been adapted to the current situation.
The newly revised regulations make new regulations on the occupation and repeated excavation of urban roads. For urban roads with an excavation area of ​​more than 20 square meters, a public announcement is required 7 days before the start of construction; underground pipe networks must be surveyed before construction to avoid damage to the pipes. Accidents occurred in the network; in order to facilitate the supervision of the public, the construction party was also required to express supervision over the telephone and the contents of the temporary road permit.
At the same time, it is also clear that road excavation should be completed within the stipulated scope and time limit. Urban roads that have been newly constructed or rebuilt for less than 5 years after completion of construction and have been overhauled and completed for less than 3 years cannot be excavated. If it is really necessary to excavate, they must be reported to the municipal government for approval. , And in accordance with the provisions of the standard 5 times to collect urban road excavation repair fees, reduce unnecessary road construction.
Plano-concave cylinder lens, PCV Cylindrical Lens are commonly used to turn a collimated laser source into a line generator. The PCV Cylindrical lens and Illumination Grade Plano-Convex Cylindrical Lens can be used together for beam expander applications. Broadband Cylindrical lens feature precision specifications for the most demanding applications. Integration of these cylindrical lens is facilitated by square form factors allowing convenient mounting options. The cylindrical lens are widely used in the fields of medical, electronic, information, agriculture, communication and etc.
We supply kinds of plano-convex cylindrical lens,plano-concave cylinder lens,Double-Convex Cylinder Lens,Double-concave Cylinder Lens, Meniscus Cylinder Lens , Rod Cylinder Lens ,special cylindrical lens etc.
Specification of our cylinderical lens as follow:
*Material: BK7,Ge,UV-grade fuse silica(JGS1,JGS2,JGS3)or other optical materials
*Dimension Tolerance: +0.0 -- -0.1mm
*Center Thickness: +/-0.1mm
*Focal Length Tolerance: +/-1%
*Surface Quality:20/10
*Surface Figure: lambda/2 at 633nm on plano side
*Clear Aperture>90%
*Chamfer: 0.25mm at 45 degree typical
*Coating Optional
Plano-Concave Cylinder Lens,Plano Concave Lens,Mgf2 Plano-Concave Lens,Plano-Concave Cylindric Lens
China Star Optics Technology Co.,Ltd. , https://www.opticsrealpoo.com