The working fluid has a great influence on the cutting speed, surface roughness, processing precision, etc., and must be correctly selected during processing. Commonly used working fluids mainly include emulsions and deionized water.
(1) Slow-speed wire cutting processing, deionized water is currently widely used. In order to increase the cutting speed, a conductive liquid which is advantageous for increasing the cutting speed is added during processing to increase the resistivity of the working fluid. The hardened steel is processed to have a resistivity of about 2×10 4 Ω·cm; and the resistivity of the processed cemented carbide is about 30×10 4 Ω·cm.
(2) For fast wire cutting processing, the most commonly used emulsion is emulsion. The emulsion is prepared from emulsified oil and working medium (concentration is 5% to 10%). Tap water, high purity water and magnetized water can also be used as working medium.
HCPE Resin(Adhesive Type) Description
HCPE resin (Adhesive Type) is excellent synthetic polymer material which has a fine overall performance. It take the special polyethylene as raw material the product which results in after the depth chlorination system. It has excellent solubility and can dissolve in a variety of aromatics, chlorinated hydrocarbons, ketones, esters and organic solvents. with excellent resistance to ozone, resistance to chemical media and flame self-extinguishing and other excellent performance, the main rigid PVC Adhesive Resin on the currently market, that has used in substituting the CPVC Resin (adhesive type) massively.
This product is according to the market and the international environmental protection request, develops the successful new product spontaneously, has the proprietary intellectual property rights, the only enterprise that succeeds in using the HCPE product applies in the adhesive profession.
Adhesive Resin,Adhesive Type HCPE Resin,HCPE Resin,Adhesive High Chlorinated Polyethylene
Shandong Gaoxin Chemical Co.,Ltd , http://www.gaoxinchem.com