Everyone knows that the decoration of a house is a very tedious task. It includes all aspects of the interior, walls, sky plates, floors, etc. In the renovation of these places, there are various ways of decoration and precautions, of course, there are also Respective decoration materials, and as the ground we most often contact, what are the floor decoration materials? Here we introduce: floor decoration materials and ground floor decoration methods.
What are the ground decoration materials:
1, wooden floor: wooden floor is simple and generous, and flexible, walking comfort, beautiful sound, but the price is higher.
2. Stone: The stone used for paving is mainly natural marble and granite. They are elegant and gorgeous, with good decoration, but they are expensive.
3, ceramic floor tiles, tile: ceramic floor tiles durable, colorful, easy to clean, fire, corrosion resistance, wear resistance, lighter than the stone material, so the application is very extensive.
4, floor coating: with adaptability, low price, variety of colors and more convenient construction.
5, plastic floor: adaptable, corrosion-resistant, walking comfort, color variety, decorative effect is good, and affordable.
6, carpet: pure wool rug texture, soft elasticity, beautiful and noble, but expensive, and easy to bug mildew. Chemical fiber carpets are lightweight, wear-resistant, flexible and comfortable to wear. They are colourful and less expensive than pure wool rugs.
7. Sound-absorbing panels: Sound-absorbing flooring has high sound absorption rate, good heat insulation, stable shape, safe and convenient construction, harmless to the human body, and strong drainage after flooding.
Ground floor decoration method:
1. The ground needs to be flat and must be dry.
2. During the construction, first apply a layer of moisture-proof film. The moisture-proof film interface should be overlapped by 20cm, and the moisture-proof film must be laid over 10cm above the foot of the wall.
3. The keel laid must be dried and a moisture-proof film should be laid on the keel. If plywood is laid on the keel, the plywood surface should be coated with moisture-proof film after being coated with moisture-proof oil. The interface should be stacked 20cm apart and spread to 10cm above the foot of the wall.
4, such as the direct use of 9mm--15mm thick plywood, plywood and plywood should be left between the gap of 20mm or saw the plywood into 60cm +120cm. And fixed on the concrete floor.
5. During the installation of flooring, gaps of 0.6--0.8mm must be kept between the floor and the floor in East China, South China and some particularly humid areas to prevent the floor from getting wet during the wet season; northeast, northwest and some special dry In the area, the natural combination between the floors is preferable, and a gap of 6-8 mm should be left between the floor and the wall.
6, install the floor is prohibited to apply any glue, only use pneumatic nails and special floor nails in the male side 45. Tilt into the keel or plywood.
Editor's summary: Floor decoration materials and ground floor decoration methods introduced here, I hope to help you, more information, please pay attention to this site.
Ground acceptance
Led Wall Washer,Ultra Bright Rgb Led Wall Washer,Waterproof Ip65 Led Wall Washer,Rgb Led Wall Washer For Bridge
Yangzhou Langxu Lighting Technology Co., Ltd , https://www.street-lighting.com