Every day people come to talk to the bathtub. The bathtub is a place where dirt is hidden. If the bathtub is used for a long time, there will be problems such as bathtub collapse, stains and rough surface. If cleaning is not done in time, the use of the bathtub is not conducive to human health. Therefore, in order to use the bathtub healthily, it must be cleaned and regularly maintained. The following small series for everyone to introduce how to clean the bathtub and bathtub to buy skills.
How to clean the bathtub
1. When using a neutral detergent, use a softer sponge or cloth.
2. Wash the bathtub every week to make sure it is kept dry when it is finished.
3. Dark-colored cleaners that can easily penetrate pigments into the bathtub must be avoided.
4. Be sure to remember not to use something with strong wear and tear. Alkaline cleaning products should not be used.
5, as long as you see signs of a little damage to the bathtub, be sure to tell the responsible party to repair, otherwise the problem will worsen.
6, after each use, the water system must be turned off, otherwise frequent dripping water will make the bathtub water.
7, do not stay in the bathtub in those metal things, otherwise the surface of the bathtub will rust and dirty.
Bathtub buying tips
1, than the thickness. You can tap the bathtub to judge the thickness of the bathtub. The thickness of the bathtub is large and naturally it will not crack.
Listen to the sound. When buying a jacuzzi, pay attention to the size of the motor sound. To buy a high-end bathtub, it is best to “test water†at the time of purchase, listen to the sound, and try the temperature.
3, see the gloss. Look at the surface gloss to understand the pros and cons of the material, suitable for any kind of material bath.
4, touch smooth surface smoothness. Applicable to steel plate and cast iron bathtubs, because both bathtubs need to be enamel plated, and the plating process is not good for fine ripples.
5, hand press, foot test firmness. The firmness of the bathtub is related to the quality and thickness of the material. The visual inspection is invisible. You need to try it yourself. For example, if you stand in, there is a feeling of sinking.
6, choose brand bathtub. In general, brand-name Sanitary Ware products, such as the bathtubs of the top ten sanitary ware brands, can provide consumers with more confidence in quality and after-sales service.
Bathtub standard size
The standard size of the bathtub in the square state is about 1 meter 7, which is also the most commonly used square bathtub standard size. In addition, according to different needs, there are 1 meter 5, 1 meter 8, 1 meter 6, 1 meter 9, etc., using 1 meter 7 The square bathtub just fits the average height of the Chinese. In addition, the basic width of the square bathtub is 0.7 meters, 0.85 meters, 0.75 meters, and 0.9 meters. The most commonly used is the 0.8 meter square bathtub. The standard size of the square bathtub is 0.7 meters in height, which is more common, and there are 0.58 meters to 0.9 meters. The height of the room. If you are not used to a square bathtub, then the choice of an oval-shaped bathtub is the same. The standard size of the bathtub is similar to the standard size of a square bathtub.
Editing summary: How to clean bathtubs and how to buy bathtubs are introduced here. I hope to help everyone. If you want to know more about yourself, you can follow the information on this site.
Bath tub how to clean
There are five general body styles of ball Valves: single body, three-piece body, split body, top entry, and welded. The difference is based on how the pieces of the valve-especially the casing that contains the ball itself-are manufactured and assembled. The valve operation is the same in each case.
In addition, there are different styles related to the bore of the ball mechanism itself.
Ball valves in sizes up to 2 inch generally come in single piece, two or three piece designs. One piece ball valves are almost always reduced bore, are relatively inexpensive and generally are throw-away. Two piece ball valves are generally slightly reduced (or standard) bore, they can be either throw-away or repairable. The 3 piece design allows for the center part of the valve containing the ball, stem & seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments, replacement of seats and gland packings, polishing out of small scratches on the ball, all this without removing the pipes from the valve body. The design concept of a three piece valve is for it to be repairable.
Stainless Steel Ball Valves, Brass Ball Valves, Sanitary Ball Valves, Water Ball Valves
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalves.com