In today's society, point-supported glass curtain walls are more common. Our company specializes in producing stainless steel docking claws. During the sale of these docking claws, many customers did not know which model of docking claws to use while purchasing stainless steel docking paws. This has become a source of confusion for some buyers. Today, I will tell you how big a model of splicing claws are used for glass, hoping to bring some help to everyone.
200's four-jaw corresponding hole and hole distance is 200mm, which is commonly referred to as 20 cm, the name of each product is called this way, this 200 series of docking claws are generally used 1.5 *1.5 The following glass. The 200 model is also the most normal and most used on the market. In a complete point-supported glass wall, not only four claws are used in the light, he also uses the two claws and the single claws. Two-claw words will be divided into 180-degree two-claw and 90-degree two-claw, and different degrees of claws should also be equipped with the corresponding single-claw. The normal normal point-supporting glass curtain wall is connected with four claws in the middle, and at the corners and corners, two claws and one claw must be used together for aesthetic reasons, and the two claws are 180 degrees. And 90 degrees two claws are selected according to the requirements of the project, 180 degrees two claws need to be used with a short list, 90 degrees two claws with a long single use.
If the glass is bigger than 200, it would be no use, such as 1.5*1.5 but not 1.5*2.0, we must choose the 220 series, and if the glass is less than 2*2.5, we must go to 250. Model number.
If you want to ensure the stability of the point-supported curtain wall, do not look at the model alone, but also the weight of the claws. The most common 200-series and four-claw claws must have a weight of at least 1.04 kg to support 1.5. *1.5 glass, 220 must reach 1.4kg at the very least, 250 must achieve 1.7kg, but now there is a relatively small claw on the market, which is a bit lighter than this ordinary claw. However, it does not necessarily hold up relative to glass.
200 models, 220 models and 250 models are the most used, there are two relatively small models are 150 and 120 models, these two relatively small claw parts used less, because there are few glass so small Used to.
These are some of the more common normal models and weights. We hope that the buyers of the curtain wall can see that my articles can help you. If you have any questions, you can contact us. 18114415222
200's four-jaw corresponding hole and hole distance is 200mm, which is commonly referred to as 20 cm, the name of each product is called this way, this 200 series of docking claws are generally used 1.5 *1.5 The following glass. The 200 model is also the most normal and most used on the market. In a complete point-supported glass wall, not only four claws are used in the light, he also uses the two claws and the single claws. Two-claw words will be divided into 180-degree two-claw and 90-degree two-claw, and different degrees of claws should also be equipped with the corresponding single-claw. The normal normal point-supporting glass curtain wall is connected with four claws in the middle, and at the corners and corners, two claws and one claw must be used together for aesthetic reasons, and the two claws are 180 degrees. And 90 degrees two claws are selected according to the requirements of the project, 180 degrees two claws need to be used with a short list, 90 degrees two claws with a long single use.
If the glass is bigger than 200, it would be no use, such as 1.5*1.5 but not 1.5*2.0, we must choose the 220 series, and if the glass is less than 2*2.5, we must go to 250. Model number.
If you want to ensure the stability of the point-supported curtain wall, do not look at the model alone, but also the weight of the claws. The most common 200-series and four-claw claws must have a weight of at least 1.04 kg to support 1.5. *1.5 glass, 220 must reach 1.4kg at the very least, 250 must achieve 1.7kg, but now there is a relatively small claw on the market, which is a bit lighter than this ordinary claw. However, it does not necessarily hold up relative to glass.
200 models, 220 models and 250 models are the most used, there are two relatively small models are 150 and 120 models, these two relatively small claw parts used less, because there are few glass so small Used to.
These are some of the more common normal models and weights. We hope that the buyers of the curtain wall can see that my articles can help you. If you have any questions, you can contact us. 18114415222
Polyquaternium-22 PQ-22 CAS 53694-17-0
Pq-22 Used In Cosmetic Industry,Polyquaternium-11 Pq-11 In Cosmetic,Dadmac And Acrylic Acid Copolymer,Pq-22 Cas No 53694-17-0
ZHEJIANG XINHAITIAN BIO-TECHNOLOGY CO.,LTD. , https://www.dadmacxht.com