Metal Element Analyzer QL-BS3B is an analytical instrument for the detection of three elements of silicon manganese and phosphorus in Nanjing Qilin. It is mainly used to detect Si in various materials such as carbon steel, raw cast iron, steel, iron, metal materials and alloy cast iron. Various elements such as Mn, P, Cr, Ni, Mo, Cu, and Ti.
How to detect and debug metal element analyzer
Metal Element Analyzer QL-BS3B is an analytical instrument for the detection of three elements of silicon manganese and phosphorus in Nanjing Qilin. It is mainly used to detect Si in various materials such as carbon steel, raw cast iron, steel, iron, metal materials and alloy cast iron. Various elements such as Mn, P, Cr, Ni, Mo, Cu, and Ti.
Metal element analyzer can meet the needs of metallurgical, mechanical, chemical and other industries in the multi-element analysis of materials in front of furnaces, finished products, incoming materials and other aspects.
Next, I will introduce you to several common aspects of instrument detection and debugging:
1. Instrument power
Turn on the power plug, the instrument voltage is between 180-250V, the instrument must have a reliable grounding point, otherwise it is susceptible to interference, causing data fluctuations. Stabilize for 10 minutes for zero input and full value adjustment. Check whether the drain hose is installed firmly, and inject distilled water (reference liquid) into the cuvette, and turn on the power switch of the instrument. At this time, the digital tubes of the three channels of the instrument all display “8â€, and the three indicators are all bright and accompanied. There is an audio, the sound ends shortly, the sign of the digital tube shows "C" or "A" and "U", and the rest shows "0.000 or other values.
2, zero input and full scale adjustment
When the instrument is used for the first time, it needs to input the zero point and adjust the full value. In the future daily use, the zero input is generally not used.
3. Establishment of standard curve
Follow the steps below to create a standard curve.
(1) The instrument is energized for 10 minutes, and three cuvettes are filled with distilled water (reference liquid);
(2) Self-calibration zero and fullness.
For more product information, please visit the following website:
High-frequency infrared carbon and sulfur analyzer http://
Infrared carbon sulfur meter http://
Element Analyzer http://
Multi-element analyzer http://
Spark direct reading spectrometer http://
Carbon and sulfur analysis instrument http://
Nanjing Qilin Scientific Instrument Group Co., Ltd. Testing Center
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Fingerprint Recognition,Face Fingerprint Recognition,Fingerprint Face Recognition,Biological Fingerprint Reader Recognition
ChangChun E-vida Technology Co.,ltd , https://www.evidatec.com