The bathroom is small, but it embodies the level of a designer, a good bathroom, its design must ensure its safe use and comfort. Bathroom decoration, you need to pay attention to a lot of details, it can be quite troublesome. However, the design is irrational and construction is not in place, which will have a great impact on the quality of life in the future.
Therefore, the following points need to be taken care of in the bathroom renovation:
First, the ceiling design.
The water vapor in the bathroom is heavy, so it is very important to choose those materials that have waterproof, anti-corrosion, and anti-rust properties as the ceiling.
Second, the ground points.
The bathroom must be waterproof before laying the tiles; after the tiles are laid, ensure that the brick surface has a drain slope (usually about 1% is appropriate), the slope is facing the floor drain; the floor must be closed after laying the tiles In experiments, the time must be at least 24 hours. When paving the floor tiles, attention should be paid to aligning and aligning the tiles to ensure the overall feeling of the entire bathroom, so as to avoid visually disturbing impressions.
Third, consider the wall.
Bathroom wall tiles should pay attention to moisture, waterproof, and to ensure the formation of a smooth tile, and to be seamed and aligned with the floor tiles, to ensure that the overall sense of the wall and the ground; such as water supply pipe outlet encountered, the incision of tiles To be small and appropriate, it is convenient for the flange cover on the water feeder to cover the incision, making the appearance perfect and natural.
Fourth, pay attention to doors and windows.
It is best to have windows in the bathroom for ventilation; if there are no windows that are unacceptable for ventilation, special attention must be paid to the details of the doors. To prevent the water in the bathroom from spilling out, the door should be slightly higher than the inner side of the bathroom; the gap between the door and the floor of the bathroom should be kept a little larger to facilitate air return; if it is a sliding door, but also in the sliding door and Make a waterproof layer between the bathroom tiles to prevent seepage.
Brand Shop: Kohler Sanitaryware
Fifth, pay attention to the laying of the circuit.
The wire joints in the bathroom must be tin-plated, and waterproof tapes and insulating tapes must be wrapped in order to ensure safety; the wire body must be covered with flame-retardant tubes; all switches and sockets must have moisture-proof boxes, and the position must also be considered Depending on the size and location, it is easy and reasonable to use, so as to reduce unnecessary troubles.
Sixth, strict waterproof road reconstruction.
Bathroom water supply and drainage line is best not to make too much changes, if you want to change, according to the specific circumstances, such as the washing machine model, the location of the water will be different, so the best waterway.
The seventh, the installation of a good sanitary ware.
It is advisable to remember the hole distance before the decoration, and select the bathtub, bath room, toilet, wash basin and other sanitary ware according to the size, so as to avoid improper size during the decoration; the installation of the toilet shall be sealed with toilet mud first. Then fix it with expansion screw or glass glue so that it is easy to repair and leave space when the toilet is clogged.
Eighth, emphasis on ventilation.
There must be an exhaust fan in the bathroom, and the exhaust fan must be provided with a retrograde gate to prevent backflow of dirty air, non-gas backflow, etc.
Nine, set aside green embellishment.
To add a bit of anger, the bathroom should not be a corner forgotten by the green. In this way, during the renovation, you can choose some shade-tolerant, humid, and potable plants to be placed in the bathroom, which will add a bit of anger to the bathroom.
Link: money to spend on the knife to tell you four ways to save money
Experience decoration design window glass switch socket glass brick glass sliding door glass door bathroom sliding door bathroom tile bathroom door bathroom wall tile bathroom door size bathroom size bathroom wash basin overall bathroom toilet design bathroom waterproof bathroom floor tile tile adhesive
Rhein Lighting has developed a line of high voltage ETL listed Led Strip Light which is perfect for home, office and outdoor decoration. The light strip has multiple colors such as white, red, blue, yellow, green and RGB etc. The strip light has clear PVC tubing, which is flexible, transparent and durable and it can be shaped, formed or bent in any angle to perfectly fit the space being decorated.
The led rope light has come with different options of lengths in a reel, which has 50ft, 100ft and 150ft. The 120v Led Strip Light can be cut in every 1.64ft/0.5m along the cutting marks, without damaging the rest strips.
The Led strip light is ETL certified, which is Eco-Friendly, No splash and UV, without mercury and no damage to human and environment.
Rhein Lighting is specialized in the design and manufacture of led panel downlight, led slim down light, backlit Led Panel Light, led rope light, led strip light, led plant light and Led Grow Light etc.
ETL Listed Led Strip Light,Hykolity Daylight 42W Led Light Fixture,ETL Listed Led Strip Lights
Rhein Lighting Technology Co.,Ltd. , https://www.rheinlighting.com