In home decoration , carpentry decoration is an important link. From the ceiling to the floor, there are traces of woodwork decoration everywhere. But many owners do n’t know enough about the standard process of woodworking decoration. If you are a layman, how can you check the effect of woodworking decoration?
The following editors have compiled the 14 tips for interior decoration woodwork acceptance for everyone to share with you:
1. Indicate that it needs to be leveled: whether there is any defect in the decoration and decoration carpentry project. It should be ensured that the surface of the carpentry project's decoration and decoration is smooth, without drumming or breakage.
2. The corner should be 90 degrees: whether the corner of the decoration is accurate. Normal corners are all 90 degrees, except for special decoration design factors.
3. The parquet must be tight: whether the decorative and decorative parquet is tight and accurate. The correct decoration of wooden parquet should be done without gaps or keeping a uniform separation distance.
4. The shape should be smooth: whether the decoration arc and roundness are smooth and smooth. In addition to a single, multiple same decoration styles to ensure the consistency of the shape.
5. The cabinet door is normal: whether the cabinet door switch is normal. When the cabinet door is opened, the operation should be light and no abnormal noise.
6. The cabinet is seamlessly connected to the wall: there is no gap in the fixed cabinet.
7. The structure is straight and flat: whether the decoration structure is straight and flat. Regardless of the horizontal or vertical direction, the correct carpentry decoration practice should be straight and flat.
8. The project should be symmetrical: whether the symmetry decoration and decoration carpentry project is symmetrical.
9. The cabinet door handle is correct: After the decoration, whether the cabinet door handle and the lock are installed in the correct position and open normally.
10. No nail holes on the panel: Are the nail holes on the decorative panel fixed?
11. The symmetry of the corner line: whether the connection point of the ceiling line of the decoration is smooth, and whether there are obvious irregular patterns and deformation.
12. The anchor line should be straight: Whether the anchor line is installed straight and accurately after the decoration.
13. The ceiling is flat and without deformation: after decoration, whether the ceiling of the toilet and kitchen parts such as aluminum buckle plate and PVC buckle plate is flat and without deformation
14. The door leaf is opened normally and the door gap is dense: after the decoration and decoration, whether the bedroom door and other door leaves are opened normally. When closed, the upper, left, and right door gaps should be tight, and the lower door gap is moderate, generally 0.5cm. Interior decoration carpentry occupies a very important proportion in home decoration, and the decoration effect is often determined by some decoration details.
The above content is provided by GOJia.com
Laboratory Manual Sliding Clean Door
Laboratory Manual Sliding Clean Door,Laboratory Manual Sliding Double Clean Door,Laboratory Manual Sliding Single Clean Door,Laboratory Manual Sliding Unequal Double Clean Door
Shenzhen Yue Ma intelligent Technol , https://www.ymcleanroomdoor.com