Winter maintenance wood floor care matters needing attention
Solid wood flooring is very sensitive to temperature and humidity. In winter, due to the influence of temperature and humidity, how to prevent the lifespan of solid wood flooring from decreasing? This is a problem that we are all very concerned about. Here we look at the maintenance of solid wood flooring in winter, what should pay attention to.
1, appropriately increase the indoor humidity
Many people believe that in the winter, when the outside air comes in, the temperature in the city drops, and the phenomenon of floor separation naturally decreases. However, the real cause of floor separation from the seams is humidity, not temperature. In addition, the higher the air temperature, the more saturated the water, which means that the indoor humidity in winter is higher than the outdoor. At this time, the outside cold air will be exchanged in, which will only make the room dry. Having an air humidifier is very straightforward and the humidity in the room is preferably controlled between 50% and 60%.
2. Step by step in the process of opening and closing geothermal heat
The first use of geothermal heating, attention should be slowly warming, if the temperature is too fast, the floor may be cracked due to expansion and distortion. And the use of geothermal heating, the surface temperature should not exceed 30 °C, when the room temperature in the human body is the most suitable ambient temperature below 22 °C, the life of the floor can also be guaranteed. When the weather is warming and indoors no longer needs heating, it should be noted that the shutdown of the geothermal system must also take place slowly. Do not dip suddenly, otherwise it will also affect the service life of the floor.
3, regular play solid wax maintenance
The interior of the solid wood floor often retains a certain amount of moisture. In the event that the geothermal heat rises in the winter, the water loss of the floor shrinks, and the gap between floors will increase. At this point, applying a solid wax to the floor will reduce the extent of the gap expansion.
4, avoid contact with a lot of water and acid, alkaline liquid
Try to avoid contact with large amounts of water on the wooden floor; avoid wiping with acidic and alkaline liquids so as not to damage the finish of the floor surface paint.
Avoid misunderstanding of solid wood floor cleaning and maintenance errors
Due to various reasons, many people have unclear understanding of solid wood flooring and will enter the maintenance misconception. Based on experience, we have sorted out the misunderstandings that most people can easily access to help families.
Misunderstanding 1: Over-maintenance
It is wrong to repeatedly use a very wet mop to repeatedly mop the floor every day. The solid wood flooring needs proper maintenance rather than over maintenance.
Misunderstanding 2: Ignore maintenance
Ignore maintenance, do not clean for a long time, do not pay attention to ventilation, the situation does not promptly repair, such as a long time without repair after the drum, it will easily lead to Alice or even unable to repair.
Myth 3: Drench the mop with water or scrub with alkaline water
Keep the floor dry and clean. Do not allow the mop to be wetted with water or scrubbed with alkaline water or soapy water so as not to damage the brightness of the paint and damage the paint film. In case of ash or dirt, use a dry mop or wipe with a wrung wet mop.
Cleansing method makes wood flooring more beautiful
How to clean solid wood floors? This problem is easily overlooked. In fact, the cleaning of solid wood floors is very particular and not like other floors. If you are often mopping the floor of solid wood, it is very harmful to the floor. Let's take a look at how to clean it.
1. Part of the board is inadvertently stained and should be removed in time
Oil stains, paints, and inks can be wiped with a special stain remover; if stains such as blood stains, juices, red wine, beer, etc., can be wiped with a damp rag or with a rag and a suitable amount of ground cleaner. No strong acid-base liquids are used to clean the floor.
2, regular cleaning floor
Sweep the floor regularly, vacuum the dust, prevent the accumulation of sand or frictional dust and scratch the surface of the floor. Place the doormat outside the door so as not to carry sand or frictional dust into the room.
3, large-scale flooding or local long-term water immersion treatment
If inadvertently large-scale flooding occurs or local water is soaked for a long period of time, if there is water, water, water, water, and water, the water should be promptly dried with a dry cloth, and let it dry naturally. It is forbidden to use an electric heater to dry or in the sun. Exposure.
4, keep the floor dry and clean
Solid wood floor maintenance
The humidity in the room should not be too large. Keep the floor dry and clean. Clean it with a wrung cotton mop. If you encounter stubborn stains, wipe it with a neutral cleaning solvent and wipe it with a wrung cotton mop. Never use it. Wash with an organic solvent such as an acid, a basic solvent, or gasoline.
Floor maintenance floor waxing solid wood floor paint room heating humidifier
Aluminium alloy is a type of metal that is widely used in various industries. This alloy is made by combining aluminium with some other metals, such as copper, magnesium, silicon, and zinc, to enhance its properties. The resulting alloy has improved properties than pure aluminum, such as higher strength, corrosion resistance, and good weldability.
One of the main advantages of aluminium alloy is its lightweight. It is about 1/3 the weight of steel, which makes it an ideal material for transportation applications, such as airplanes, cars, and trains. The alloy's high strength also makes it suitable for structural applications, such as in the construction industry.
The corrosion resistance of aluminium alloy is another benefit. Its protective oxide layer prevents rust and other forms of corrosion, making it an ideal material for outdoor applications, such as building facades, roofing, and window frames. The alloy's good thermal conductivity also makes it suitable for heat exchangers and other heat transfer applications.
Aluminum alloy also has a good aesthetic appeal. It can be easily shaped, welded, and fabricated into various shapes and designs. It can also be anodized or painted to provide a decorative finish.
In conclusion, aluminium alloy is a versatile material with many advantages. Its lightweight, strength, corrosion resistance, thermal conductivity, and aesthetic appeal make it an ideal choice for many applications.
7075 Aluminum,6061 Aluminum,5052 Aluminum,6063 Aluminum
Lizhi Precision Manufacturing Technology Co.,Ltd , https://www.autoindust.com