Nowadays, wood flooring is widely used in decorating. If such flooring is used for a long time, various problems will arise, such as discoloration, fuzzing, deformation, etc., which will seriously affect the aesthetics of the home. Is it necessary to remove the floor and re-paste it? The answer is no, we just need to refurbish the floor to get the desired effect. What is the floor retreading procedure? What are the precautions for floor renovation? The following article will share these issues with you and look forward to helping those who need them.
What is the floor retreading procedure?
This is a very professional work. It is not recommended that you refurbish the floor yourself. In order to achieve better results, it is best to hire a professional master to refurbish the floor. Here are the specific steps for floor renovation:
1, the first floor renovation, the use of large-scale floor renovation machinery several times to remove the paint layer, the surface 1-2 mm. Pay attention to sanding with 40-, 80-, and 120-mesh sandpapers one by one. The larger the mesh, the smaller the sandpaper particles and the less noticeable scratches after grinding. This ensures that the polished surface is smooth and smooth.
2, puttying putty knife, floor polished after the need to scrape putty leveling the floor, using a transparent primer with a matching floor paint putty, scraped on the polished floor to be dry.
3, brush primer, color treatment, scraping putty after the floor brush primer or color treatment. Because the texture of the solid wood surface is natural, it cannot change the color, but can only adjust the depth of the floor color.
4, brush finish, after the primer is dry and then brush the paint, dry again after grinding with water sandpaper carefully, the floor surface to a little rough grinding, remove dust, brush the second layer of paint.
5, wax polishing conservation, until the paint finish, with a professional waxing equipment, the floor will be marked with a floor polish polishing.
What are the considerations of floor renovation?
In order to achieve a better refurbishment, we need to do a lot of preparation when we are refurbishing. In order to facilitate the construction of the master and ensure the effectiveness of the refurbishment, everyone needs to remove all the furniture inside the house before refurbishing the floor, on the one hand to ensure that the furniture is not covered with dust, etc., on the other hand to facilitate the renovation of the floor.
What are the two aspects of floor renovation?
Now everyone is very concerned about health, in order to ensure the environmental health of the home, everyone should use environmentally friendly water-based paint when the floor renovation. When purchasing this type of paint, everyone should pay attention to the parameters such as the wear resistance of the product and check the inspection certificate to ensure that the environmental protection is excellent. In addition, everyone has a good grasp of the number of times the floor paint, generally need to brush the primer again, two coats. If the surface of the polished floor is flawed, it is necessary to brush the primer several times depending on the situation.
What are the three considerations of floor renovation?
The wooden floor has a natural texture, and although everyone can't change the texture of the interior during the refurbishment, it can be changed by painting. The specific method is: Everyone in the renovation process, you can add the required paint in the floor paint, brush on the floor. But if the floor itself is darker and you want to make it lighter, you need to polish it first, and then brush the paint several times to make it darker.
The above is about the refurbishment steps of the floor and what are the relevant considerations for the floor retreading precautions. It is worth noting that not all material floors can be refurbished. Generally speaking, only the solid wood floor, solid wood composite floor and bamboo wood floor are available. Can be refurbished! If you have more related issues, welcome to continue to pay attention to this site, and later will show more exciting content for everyone.
Coal mine rock tunnel drilling and loading unit( referred to as" Drill Loader") is an efficient continuous operation equipment that integrates two functions of rock drilling and loading. Mainly used for excavation operations in mine rock tunnels, diversion tunnels and other engineering tunnels. Its application increases the speed of excavation, reduces the labor intensity of work, improves the safety of excavation construction operations, and well realizes the mechanized operation requirements of rapid excavation of rock tunnels. At the same time, it solves the problem of not driving various equipment in small and medium roadways. The two drill arms of the drilling unit can simultaneously blast holes on the working face of the roadway, or simultaneously blast and top the bolt holes. The backhoe mechanism picks up the rock from a distance and sends it to the scraper conveyor. The scraper conveyor unloads the rock from the tail into the mine cart or belt conveyor. The bucket can also be used to clean the working surface. The breaker is integrated on the boom, which does not need to be disassembled during use. When large rocks are encountered, the breaker on the boom can be used to break.
Drill Loader
Drill Rig,Drill Rig Loader,Bolter Drill Rig,Drill Rig Machine
NORTH HEAVY GRYPS EQUIPMENT AND ENGINEERING CO.,LTD , https://www.nhgtunnel.com