In factory buildings, computer rooms, warehouses, laboratories, wards, operating rooms, workshops, etc., plant floor paints are generally used. What are the main points of attention when purchasing floor paint ? How to maintain it? Xiao Bian next to give you one by one to introduce it.
Floor paint introduction
The floor paint of the factory is for the sake of beauty and improving the working environment of the factory floor, to achieve environmental protection, to reduce the dust and the role of the ground in the wet, in the workshop floor epoxy floor, epoxy anti-static floor, corundum wear-resistant floor, guide Static electricity fire flower wear-resistant floor, self-leveling cement floor, heavy anti-corrosion floor, self-leveling hardener floor construction.
Floor paint has high strength, wear-resistant, beautiful floor, with no seams, solid texture, good chemical resistance, corrosion, dust, easy maintenance, low maintenance costs and so on. According to different application requirements, a variety of solutions can be designed, such as thin layer coating, 1-5mm thick self-leveling floor, non-slip and wear-resistant coating, mortar type coating, anti-static and anti-corrosion coating. Therefore, extensive use of factories, computer rooms, warehouses, laboratories, wards, operating rooms, workshops and so on.
The selection of floor paint is very important. If it is improperly selected and scratched, it is easy to wear, easy to peel off, etc.
How to maintain the floor paint
Keep clean and hygienic, avoid impact and scratches: Avoid overweight machines and objects directly hitting the ground; avoid sharp equipment scratching the ground and remove oil and solvent in time: Although the construction floor has good acid and alkali resistance, but also The need for proper care, such as water, acidic or alkaline solvents, engine oil, etc. accumulated on the ground, should be promptly cleaned, it is best not to exceed 24 hours. Timely repair of damage: If the floor paint surface is damaged, there is oil dripping at the damaged place, then the damaged part needs to be repaired in time to prevent the oil from seeping into the ground structure or under the paint layer.
Floor paint purchase considerations
The selection of the floor paint is very important. If it is improperly scratched, easy to wear, easy to delaminate, etc., before the construction, we must pay attention to the requirements for the examination of the floor.
First, mechanical performance requirements:
1. Abrasion resistance: What vehicles will the floor use when it is in use?
2. Pressure resistance: How much load will the floor bear during use?
3. Impact resistance: Does the impact force cause surface peeling?
Second, chemical performance requirements:
1. Acid and alkali resistance: The type and concentration of corrosive chemicals used.
2. Solvent resistance: Solvent type and contact time when used.
Third, the floor position status: According to whether the floor is in the underground floor or ground floor position, to determine whether the need for moisture treatment or choose a special moisture floor?
Fourth, the base surface condition requirements:
1. Base strength: General requirements compressive strength ≥ 20Mpa
2. Flatness: Does it need to be repaired with epoxy mortar?
Fifth, beautiful requirements:
1. Color requirements: Does it require color division?
2. Brightness requirement: Choose matte or light?
3. Flatness requirements: Is there a requirement for the flatness of the floor?
Summary: The above is the knowledge of the workshop floor paint that Xiaobian shared for everyone. I hope to help everyone. More exciting content is on the website information platform.
Factory Waterproof Workshop Sliding Door Factory Feng Shui Floor Paint Factory Color Steel Sandwich Board Partition
Pan Head Screw,Pan Head Sharp Screw,Phillip Pan Head Sharp Screw ,Pan Phillips Head Screw
Handan Jiankun Hardware Products Co., Ltd / Handan best import and export trade co., Ltd , https://www.jkscrew.com