Experts say that pillows do not damage cervical curvature

At least one-third of a person's life is spent in sleep. Infants and young children who stay in bed for a longer period of time are relatively longer.

The shape, size, height, hardness and sleep posture of the pillow during this long period of time will have a great impact on human health.

Destroy cervical curvature

The average person's pillow is too flat and does not meet the physiological requirements of the human body. Long-term use will destroy the physiological curvature of the human cervical vertebrae, causing it to straighten or bend in the opposite direction, thereby causing the neck muscles and ligaments to be in a stretched state for a long time, so that If you don't get enough rest and strain, you will develop a stiff neck or cervical spondylosis.

Simply put, a pillow that fits the physiological curvature of the human cervical vertebrae and is both soft and hard, comfortable and beautiful is most suitable. The cervical vertebra is located at the uppermost end of the human spine and is wrapped in the neck and consists of 7 vertebrae. In order to cushion and reduce the shock during walking and jumping, and to protect the brain, the seven vertebrae of the human cervical vertebrae are not only vertically stacked, but form a smooth, forward-facing arc. This is the so-called cervical curvature, the pillow. The role is to maintain this physiological curvature.

The length of a single pillow is 15 cm wider than the width of one's shoulder. The height is equal to the height of the fist (the height of the fist is higher than the height of the tiger's mouth) after compression. On the surface of the pillow, the part supporting the neck and the back (neck curvature) should be cylindrical and have a certain hardness, which can be set to support and support the neck curvature. The part supporting the back of the head should be 3-5 cm lower than the above part, so that it can support the head and adapt to the height of the neck.

Pillow too high or too low

The height of the pillow is also important. If the pillow is too high, the cervical vertebrae of the person will be mechanically distorted in the anterior flexion position, which will increase the tension of the back muscles, and will also lead to intense activity of the sternocleidomastoid muscles on the left and right sides of the neck, which hinders the normal blood circulation of the human body. Affects the smooth flow of the respiratory system, causing sore shoulders. After a long time, it will become a "double chin", and it is also very easy to cause cervical spondylosis.

The pillow is too low, which will also put the cervical vertebrae in an unfavorable state, resulting in tension in the sternocleidomastoid muscles, which will not achieve the purpose of eliminating fatigue.

The pillow is too hard, which can make the head muscles tense and seriously affect the relaxation of the whole body muscles.

If the pillow is too soft, it will cause the neck to stretch out. The excessive pulling of the neck will cause the muscles of the throat to be tight and easy to increase the snoring.

The ideal height of the pillow when sleeping, the adult is generally 6-8 cm, or equal to the size of the shoulder width of the human body. The pillow material should have a soft feeling and good elasticity, breathability, moisture resistance, moisture absorption and the like.

DIN Sanitary Pipe Fittings

Our Stainless Steel DIN Sanitary Pipe Fittings includes sanitary elbow, sanitary tee, sanitary reducer, with Welded, Tri-Clamped, Threaded ends, which is used in food, milk, beer, brewage, pharmacy, comestic, biopharmacy, etc. Material in SS304 & SS316L, Standard including 3A, DIN, SMS, BS, RTJ, ISO, IDF, DS, INCH, etc,size from 1/2" to 12".

Kaysen Steel is a China manufacturer, supplier and exporter for Stainless Steel Sanitary Pipe Fittings, DIN Sanitary Pipe Fittings, DIN Hygienic Fittings, DIN food grade fittings.


Sanitary Pipe Fitting Specification:
â–ª Standard:3A, DIN, SMS, BS, RTJ, ISO, IDF, DS, INCH, etc
â–ª Material: Stainless Steel 304 (1.4301), Stainless Steel 316L(1.4404) etc.
▪ Size Range: 1/2″ to 12″ / DN15 ~ DN300
â–ª Connection Type: Welded, Tri-Clamped, Threaded

Surface Finish:
Mechanically polished and electropolished are available for our products. Outside and Inner surface can be treated complied to specified needs, and to meet FDA, GMP requirement.
Tube and Fittings: Ra0.4, Ra0.6, Ra0.8 or specified ( 180grit, 240grit, 300grit, 400grit, mirror polished, sandblasting finish, brushed finish etc.)
Both outside and inner available.

Quality & Inspection:
â–ª PMI test to verify material grade
â–ª Dimension controlling during fabricating and finished
â–ª Visual and surface 100% examination before shipment
â–ª Packed in carton box firstly, then in wooden case

Strength:
â–ª Material of stainless steel 316L and 1.4404 is from reputed mill to guarantee the chemical composition and mechanical properties.
â–ª Fast delivery is possible to meet your needs well in time.
â–ª Low cost from bulk production will reduce your budget and improve your business.
â–ª Small quantity available.
â–ª OEM is available.
â–ª Material certificate is traceability.

Din Sanitary Pipe Fittings,Din Sanitary Fittings,Din Hygienic Fittings,Din Fittings

Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com

This entry was posted in on