Product Description
       Our desiccant masterbatch is designed specifically for removing moisture from recycled PE/PP/PS/EVA/HIPS during processing. Its great advantage is it can effectively absorb moisture while processing, so that the recycled PE/PP/PS/EVA/HIPS scraps and granule could be directly used to make plastic products without pre-drying.And the product quality could be proved to be very good. 
    Â
       Actually,We add high MI PE into our desiccant masterbatch instead of common low MI plastic as carrier to make it perform better,so the dispersion,liquidity and effectiveness are very good and our desiccant masterbatch quality is better!!
Our moisture absorbent master batch compared with the driers on the costs:
| Method | Labor cost | Equipment depreciation | Electricity cost | Material cost | Safeguard fee | efficiency |
| Driers | Need more workers, all the process need to take good care | Need to purchase a new equipment, cause the depreciation fee | cause extra electric cost while drying | The material weight lost while drying because the moisture was evaporated | Much noise | It will extend the working time |
| Moisture absorber | The process no need to add extra workforce | No need to purchase new equipment | No extra electric cost | The moisture was absorbed by the master batch, which still stays in the material | No noise | Save time and make high efficiency |
Â
NOTE:Â
      Normally 2-5% added for film product and 4-6% for sheet/board/pipe product, just mix it with the resin material like the color master batch, but please not dry the mixed material with oven or some other machine, the mixing shall under normal temperature.
     There are two key points that should be specially noticed while processing:
1. premixing:  high temperature mixing before processing is not permitted, so do not heat up the stirring machine or material, and do not let the mixed material stay in the stirring machine for a long time or it will absorb moisture while mixing and block the screen. Simple stirring under normal temperature is ok.
Â
2. storing:Â this master batch should be used within 12-24 hours after the pack has been opened for it absorbs water moisture very well when it was exposed to air.
Package
         For dessicant MB,we have two kinds of packages,one is 25kg cartons with 5*5kg Vacuum bag;another one is Soft Package,we use 25kg kraft paper bags with 5*5kg double-layer pe bag.(25kg/bag,1FCL=27tons)
FAQ
1. Do your precious Products need to protect from sunshine?
Indeed, if your precious products are using in the outdoor, we can add Anti-UV agent in the Masterbatch to make it more high Light/Color Fastness.
2. Do your precious Products need to be more white and get rid of bad smell?
Indeed, if your precious products are made of recycled plastics, we can add whiten agent or special fragrance agent in the Masterbatch to make it more white and get rid of bad smell.
3. How about the quality control of your products?
1) We pay great attention to quality control from raw materials to finished products, each production link      meets the quality system of ISO9001-2008.
2) All products meet RoHS standard.
3) All products are approved by SGS.
4. How to get a quotation?
 A). send us a sample
 B). inform us your specific requirements or the technical data sheet:
   a) Color( e.g. Pantone color number)
   b) Pigment concentration
   c) Final products application
   d) Polymer carrier
   e) Heat fastness level
   f)  Light fastness level
   g) MFI
We will try our best to work out the relative solution to match your needs.
5. What's the shipping freight?
It will depend on the volume and weight of the materials. Pls. tell us the nearest seaport or airport, we can quote you specially.Â
       We can also customize desiccant masterbatch according to your requirements,so please don't hesitate to contact me!^_^
Tel/86-15889980235
Â
Grow Lights are a great choice for growers who are dealing with hot HPS lights and want to change to something that's going to run cooler. Although LED Grow Lights do produce heat,the smaller models might not bring up the temperature of your grow space.Even the more powerful models of LED grow lights that produce a lot of heat still have built-in cooling systems to help prevent the heat from beaming directly down onto your plants.
Yields! With a quality Grow light and an average-to-good grow,you can expect yields of about 0.5g/watt. It depends a lot on strain,and pro growers can yield even more,but that's a good rule of thumb.As an example, a 200W LED (200W true power draw, not an "equivalent" wattage) would yield about 100 grams on average, or 3.5 ounces
Features
Plug with listed certificate safe to use.
Product Images
PAR Value of our 2000W LED Grow Lights
The Plug you can choose
Applications
Our professional full spectrum grow light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.
Our Ageing Test
Package
Cautions:
1.Do not use the lights in dripping water or anywhere where they will get wet, water and electricity can be a dangerous mixture
2. The working environment for the light is -20~40 degree celsius,45%RH~90%RH.
3. To protect the light, Plz cut off the power when there is a lightning strike.
4. Don`t touch or move when the light working.
Suggestions:
1.Clean the dust inside every 6 months to ensure the good heat dissipation and long life time.
2.Don`t keep too short distance to the plant canopy to avert leaves bleaching.
3. Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hang too high.
4. While taking care of the plants, please spray the leaves and branches 2-3 times everyday, to ensure the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp
Trade Terms
Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)
Sample will be delivered within 7 working days.
Discounts are offered based on order quanlityes.
MOQ:sample order are acceptable
Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.
Philizon is a company that makes it possible to produce fresh vegetables:
Where it is too hot or too cold,
Where there is too much or too little sunlight,
We create in a complete closed indoor environment the optimal conditions to grow.
Warmly welcome to visit our factory at any time and we will pick you up at the airport or hotel as you request.
Greenhouses Led Plant Grow Light,Led Grow Light,Grow Light,Square Led Plant Grow Light
Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledplantgrowlights.com