In order to improve the rapid development of China's resources, coal resources and other natural resources, the application of coal slag crusher in actual production will become more and more extensive. The use of cinder pulverizer can effectively pulverize and decompose any hard rock, coal mine and water-containing high-humidity materials for convenient transportation. Moreover, if the cinder pulverizer is used to pulverize the coal slag, the running cost can be reduced, the user money can be saved, and the user's profit can be increased. The Wanhua coal slag pulverizer adopts two high-speed operation of the upper and lower rotors simultaneously, and the material is in the pulverizing chamber by the principle of dynamic balance. After the hammering of the hammer, the particle size used by the people is finally obtained.
[Wanhua Cinder Crusher Instructions:]
1. The long-term operation of the pulverizer should be fixed on the cement foundation. If the working place is changed frequently, the pulverizer and the motor should be installed on the frame made of angle iron. If the pulverizer is powered by diesel, the power of the two should be matched, that is, the diesel engine power is slightly larger than the pulverizer power, and both The pulley grooves are the same, and the outer end faces of the pulleys are on the same plane.
2. After the pulverizer is installed, check the fastening condition of each fastener. If it is loose, it must be tightened.
3. Check if the belt tightness is appropriate and whether the motor shaft and the pulverizer shaft are parallel.
4. Before starting the pulverizer, first turn the rotor by hand to check whether the teeth, hammer and rotor are running flexibly and reliably. There is no collision in the shell. Whether the rotation direction of the rotor is consistent with the direction indicated by the arrow on the machine, the motor and the smash Machine lubrication is good.
5. Do not change the pulleys casually, in case the rotation speed is too high, the explosion chamber will explode, or the rotation speed will be too low, which will affect the working efficiency.
6. After the pulverizing table is started, it will be idling for 2 to 3 minutes. After there is no abnormal phenomenon, it will be fed again.
7, at work should pay attention to the operation of the pulverizer at all times, the feeding should be even, to prevent blocking the car, do not overload the machine for a long time. If vibration, noise, high temperature of the bearing and the body, and external spraying are found, stop the machine immediately and continue working after troubleshooting.
8. The crushed materials should be inspected carefully to avoid accidents such as copper, iron, stones and other hard objects entering the crushing room.
9. The operator should not wear gloves. When feeding, stand on the side of the crusher to prevent rebound debris from injuring the face.
Our company mainly produces: Cinder crusher Shale crusher
Telephone mobile phone network address: http://
Company Name: Gongyi Wanhua Machinery Trading Co., Ltd.
Low carbon USS flat washers, typically used with Grade 8 or hardened steel bolting, are used under bolt heads or nuts to increase the bearing surface area, or to offer protection so that the nut or bolt can be rotated without distortion of the bearing surface. Flat washers are also used to give tightness to a joint, to prevent leakage, and especially to distribute pressure under the head of a bolt or nut. Dimensional specifications are governed by ASME B18.21.1. USS (United States Standard) flat washers have a larger outer diameter than SAE (Society of Automotive Engineers) flat washers, and can be utilized in nearly any application. ASTM F844 covers the standard specifications for unhardened steel flat washers for general use. Available in zinc plated finish. Zinc plating sacrifices itself, corroding before the base material, offering added corrosion resistance.
If you need more information or want to order washers, please contact us.
Carbon Steel Gasket,Zinc Coated Washers,Galvanized Steel Washers,Galvanized Plate Washers
Taizhou Hongchuang Hardware Co., Ltd. , https://www.jstaizhouhongchuang.com