After the electric water heater is permanently installed, it is inevitable that some minor faults will occur. Although the fault occurs, it is necessary to wait for the after-sales personnel to inspect and repair. However, waiting for the maintenance personnel to solve the bathing problem within this time is not troublesome. Edited for everyone to recommend some electric water heaters glitch to solve the problem, perhaps you can solve the glitch with your fingers can be saved from waiting for maintenance.
Why is the leakage protection indicator not lit and how to deal with it?
The main reason why the leakage protection indicator does not light is that the power socket has no electricity or poor contact; the heat pipe and other parts have leakage.
Treatment method: first check whether there is electricity and the contact between the leakage protection plug and the socket is good with the electric pen. Then press the reset button of the leakage protection plug to return to normal. If the electric heating tube is damaged, replace the electric heating tube; check the electric leakage with an electric pen. Under normal circumstances, the machine is filled with water, and the insulation resistance between the detecting electrode and the metal casing should be greater than 2MΩ. If the electric leakage pen is used to find the leakage part Try to eliminate leakage.
The heating indicator is on but not heated?
Generally, the cause of this failure is that the connection between the heating pipe plug and the power cord is poor or broken; check if the heating pipe is broken, check whether the power cable is good, replace the heating pipe, or replace the cable.
The heating indicator is not lit and cannot be heated?
Poor contact or disconnection of the thermostat connection, the indicator light is broken: Check the thermostat and the indicator to eliminate the replacement component. The thermostat is blown: replace the thermostat.
No insulation, heating until it trips?
The temperature controller senses excessive temperature and short circuit: replace the temperature controller.
What is the reason why the electric water heater has been heated for too long?
The water heater is not heated by the highest power (refer to the electric water heater with power conversion function): the power conversion switch is rotated to the maximum power level; the electric heating tube is aging: the electric heating tube is replaced; the township or rural voltage is too low.
The heating indicator is not lit, but can be heated normally?
Poor contact or disconnection of the indicator connector: The indicator is broken: Check that the connection plug is not in good contact and replace the indicator.
[Scan the QR code below, pay attention to the WeChat public number "Jiuzheng cabinet network "; you can view the popular article " female compatriots dedicated to the cabinet industry!" ", want to communicate with peers can join the Jiuzheng building materials network cabinet exchange group]
Cylindrical Lens,Cylindrical Lens,Optical Glass Cylindrical Lens,Pcx Cylindrical Lens
China Star Optics Technology Co.,Ltd. , https://www.csoptlens.com