According to statistics, since 2010, the growth rate of production and sales of the machine tool industry has been over 40%. Galaxy Securities estimates that the compound growth rate of the machine tool industry will be 25% to 30% in the next five years, and mid- to high-end CNC machine tools will become the main force for growth. Galaxy Securities explained that on the one hand, the growth momentum comes from the continuous upgrading of existing products, gaining an international market share, and on the other hand, it has entered into the product areas supported by the country through technological research and development and product innovation, forming new growth points.
"The level of the machine tool industry essentially reflects the industrial level of a country." Professor Yu Shengmei said, "CNC machine tools are known as high-end equipment manufacturing machine tools, but our country's demand for low-end machine tools is still very large. It is obvious that the industrial level is not as good as that of foreign industrial countries."
“The backwardness of the machine tool industry level is caused by a variety of factors.†Yu Shengmei analyzed, “The technology of China's machine tool industry mainly comes from the help of Soviet technical personnel in the 50s and 60s of the last century, but afterwards due to issues such as treatment, The loss of researchers in the machine tool industry is very fast and the cohesion is not enough. Long-term backwardness has caused domestic companies to spend more to buy foreign products and meet their own needs. It will take at least a decade to change the current situation. ."
However, the huge demand for the machine tool industry is close at hand. “Researching machine tool-related technologies must be practical and time-consuming. However, some companies are very short-sighted and wait for orders to be placed this month. The next month’s products will Effective, so they have chosen to buy foreign products, rather than supporting the domestic enterprises." Yu Shengmei said. Under such a background, a large amount of profits have been absorbed by foreign industrial advanced companies. “Even if domestic companies have developed similar products at the same price, domestic downstream industry companies are still willing to choose products from foreign companies and feel that the technology is more mature and more assured. "Yu Shengmei said.
The BOCI International report also pointed out that as the world's largest machine tool consumer, the self-sufficiency rate of China's high-end CNC machine tools industry is seriously low, and there is a big gap between the world's advanced countries in design and R&D, materials and processes, and parts and components. . While benefiting the country’s industrial policy, the huge demand of the downstream industry has won precious opportunities for the development of the CNC machine tool industry in China. “Continually increasing consumption capacity and infrastructure development driven by regional revitalization planning have determined the Chinese automobile market and construction machinery. The market will continue to maintain a good growth for a long period of time, which will determine the good prospects for the growth of China's machine tool market," said BOC International in its report.
The 4000 kilo automatic high-speed precision silicon steel sheet blanking production line developed and manufactured by the Jinan No. 2 Machine Tool Group passed the user's pre-acceptance inspection, and another domestic first set of equipment was born in Jinan No. 2 Machine Tool Group. The news released by the Shandong State-owned Assets Supervision and Administration Commission of the People's Republic of China recently undoubtedly inspired the company to get up and down.
Our stamping process equipment does not require imports, and the level of technology has been the same as that of industrial advanced countries. According to Dai Rongju, chief engineer of the Jinan No.2 Machine Tool Group's automatic company.
Everything is not easy. At present, the domestic high-end CNC machine tools basically need to be imported, while the machine tools that can be exported to foreign countries are basically not. Professor Yu Shengmei, a state-level expert in CNC machine tools, said that the main difference is that the technical level of the two parties is quite different.
However, under the background of accelerating the development of high-end equipment manufacturing industry in the country, China's machine tool manufacturers headed by Jinan No. 2 Machine Tool Group have seen the spring of the industry development and have begun to energetically strive to produce more high-end machine tool products and change China’s industrial Fall behind.
Jinan Second Machine Tool Group Leads Breakthrough
Now China is already the world's largest consumer of machine tools, but domestic machine tool companies produce mainly low-end products, which may produce more than 100,000 units per year. Each year, they import 10,000, 20,000 high-end machine tools, and then spend on imported high-end machine tools. On the **, and domestic low-end machine tool output value. Professor Yu Shengmei said.
Obviously, after the country has included the high-end equipment manufacturing industry in the seven strategic emerging industries, participating in international competition and trying to win has become a goal that domestic enterprises are eager to rise. The Jinan No. 2 Machine Tool Group is also trying to do so.
Zhang Zhigang, chairman of Jinan No. 2 Machine Tool Group, went to Beijing for a report and referred to the company's high-speed stamping line project. The project was participated by the National Development and Reform Commission, the Ministry of Science and Technology, and the Ministry of Industry and Information Technology. It was organized by the National High-end CNC Machine Tool and Basic Manufacturing Equipment Technology Major Project Implementation Management Office and reported to the responsible officials of the State Council and relevant ministries and commissions on the implementation of major science and technology projects. A total of 4 companies participated in the project. . In the report, Zhang Zhigang was the only one of the four reporting units. The reporting time was extended from the originally scheduled 8 minutes to 15 minutes. The reason was that during the reporting process, Jinan No. 2 Machine Tool Group became the only company to receive leadership interventions. Minister Wan Gang said at the time that the current level of the company's stamping line was not simple, and it was not easy. From 12 beats per minute to 16 beats, the efficiency increased by a quarter and quality also drove the company.
Among the six major types of machine tools provided for auto companies, the stamping process equipment of Jinan No. 2 Machine Tool Group is also the only type of equipment that does not require imports. The current market share is about 80%. The large-scale rapid stamping line mentioned in the above report Shanghai GM Dongyue Automobile Co., Ltd. and Chery Automobile also completed installation and commissioning work. There is basically no machine tool product exported to foreign countries. The reason is that the technical level is not reassuring. Yu Shengmei said.
However, Dai Rongju said: When some international auto companies’ joint ventures in China are making relevant tenders, we are the only company in China that is qualified to participate in bidding. In the competition with foreign companies, they often succeed in winning the bid. The level of technology has been equal to industrial developed countries.
Dai Rongju refers to the machine tool products for automobile manufacturers. Our products mainly supply auto companies, but they basically cover different levels of demand. Dai Rongju said.
Lu Jiansheng, deputy general manager of the Jinan No. 2 Machine Tool Group, said in an interview with People's Daily that about 7 or 8 of the 10 cars currently in the market are manufactured using our equipment. The Jinan Science and Technology Bureau stated that Jinan No. 2 Machine Tool Group is currently the largest forging equipment and most comprehensive metallurgical machine tool manufacturing enterprise in China with the largest overall product category and strongest overall strength, and almost all of its own-brand automobile production. The large-scale press equipments are all from Jinan No. 2 Machine Tool Co., Ltd., including GM, Honda, Volkswagen and other joint venture brands. Most of them use the products of Jinan No. 2 Machine Tool Group. And complete exports to the United States, Canada, Germany and more than 50 countries and regions, becoming 'one of the world's three major stamping equipment manufacturers'. Jinan Science and Technology Bureau said.
There is indeed a gap between domestic high-end machine tool products and foreign advanced level, and this requires further improvement of our technical level. Dai Rongju said.
However, Dai Rongju also pointed out that after the country publishes relevant plans for the high-end equipment manufacturing industry, the company must also hope to seize market opportunities.
In the news released by the Shandong State-owned Assets Supervision and Administration Commission of the People's Republic of China, the 4000-kilo-bar automatic high-speed precision silicon steel sheet production line developed by the Jinan No. 2 Machine Tool Group has successfully passed the pre-acceptance inspection of Dongfang Group Dongfang Motor Co., Ltd. Originally, this type of product market has been monopolized by foreign companies. The orders obtained by Jinan No. 2 Machine Tool Group came from winning the same stage competition with German and Japanese companies in 2009. This product has reached a higher level in terms of machine structure, selection of parts, machine vibration and noise, and stamping efficiency. Jinan Science and Technology Bureau said.
In addition, the company also stated that the production of high-torque mechanical dual-oscillating milling head has also broken the long-term technical monopoly of the developed countries in China, and has been well applied and verified in the processing of the Three Gorges hydropower station blades.
The company’s announcement also stated that since August of this year, it has successively won a series of high-end product orders in international bidding, such as signing single-arm, two-arm feeding fast stamping with FAW-Volkswagen, Shanghai GM, and Jiangling Auto. Lines, large robot press lines, large multi-station presses and other supply contracts show the company's strong international competitiveness.
"The level of the machine tool industry essentially reflects the industrial level of a country." Professor Yu Shengmei said, "CNC machine tools are known as high-end equipment manufacturing machine tools, but our country's demand for low-end machine tools is still very large. It is obvious that the industrial level is not as good as that of foreign industrial countries."
“The backwardness of the machine tool industry level is caused by a variety of factors.†Yu Shengmei analyzed, “The technology of China's machine tool industry mainly comes from the help of Soviet technical personnel in the 50s and 60s of the last century, but afterwards due to issues such as treatment, The loss of researchers in the machine tool industry is very fast and the cohesion is not enough. Long-term backwardness has caused domestic companies to spend more to buy foreign products and meet their own needs. It will take at least a decade to change the current situation. ."
However, the huge demand for the machine tool industry is close at hand. “Researching machine tool-related technologies must be practical and time-consuming. However, some companies are very short-sighted and wait for orders to be placed this month. The next month’s products will Effective, so they have chosen to buy foreign products, rather than supporting the domestic enterprises." Yu Shengmei said. Under such a background, a large amount of profits have been absorbed by foreign industrial advanced companies. “Even if domestic companies have developed similar products at the same price, domestic downstream industry companies are still willing to choose products from foreign companies and feel that the technology is more mature and more assured. "Yu Shengmei said.
The BOCI International report also pointed out that as the world's largest machine tool consumer, the self-sufficiency rate of China's high-end CNC machine tools industry is seriously low, and there is a big gap between the world's advanced countries in design and R&D, materials and processes, and parts and components. . While benefiting the country’s industrial policy, the huge demand of the downstream industry has won precious opportunities for the development of the CNC machine tool industry in China. “Continually increasing consumption capacity and infrastructure development driven by regional revitalization planning have determined the Chinese automobile market and construction machinery. The market will continue to maintain a good growth for a long period of time, which will determine the good prospects for the growth of China's machine tool market," said BOC International in its report.
The 4000 kilo automatic high-speed precision silicon steel sheet blanking production line developed and manufactured by the Jinan No. 2 Machine Tool Group passed the user's pre-acceptance inspection, and another domestic first set of equipment was born in Jinan No. 2 Machine Tool Group. The news released by the Shandong State-owned Assets Supervision and Administration Commission of the People's Republic of China recently undoubtedly inspired the company to get up and down.
Our stamping process equipment does not require imports, and the level of technology has been the same as that of industrial advanced countries. According to Dai Rongju, chief engineer of the Jinan No.2 Machine Tool Group's automatic company.
Everything is not easy. At present, the domestic high-end CNC machine tools basically need to be imported, while the machine tools that can be exported to foreign countries are basically not. Professor Yu Shengmei, a state-level expert in CNC machine tools, said that the main difference is that the technical level of the two parties is quite different.
However, under the background of accelerating the development of high-end equipment manufacturing industry in the country, China's machine tool manufacturers headed by Jinan No. 2 Machine Tool Group have seen the spring of the industry development and have begun to energetically strive to produce more high-end machine tool products and change China’s industrial Fall behind.
Jinan Second Machine Tool Group Leads Breakthrough
Now China is already the world's largest consumer of machine tools, but domestic machine tool companies produce mainly low-end products, which may produce more than 100,000 units per year. Each year, they import 10,000, 20,000 high-end machine tools, and then spend on imported high-end machine tools. On the **, and domestic low-end machine tool output value. Professor Yu Shengmei said.
Obviously, after the country has included the high-end equipment manufacturing industry in the seven strategic emerging industries, participating in international competition and trying to win has become a goal that domestic enterprises are eager to rise. The Jinan No. 2 Machine Tool Group is also trying to do so.
Zhang Zhigang, chairman of Jinan No. 2 Machine Tool Group, went to Beijing for a report and referred to the company's high-speed stamping line project. The project was participated by the National Development and Reform Commission, the Ministry of Science and Technology, and the Ministry of Industry and Information Technology. It was organized by the National High-end CNC Machine Tool and Basic Manufacturing Equipment Technology Major Project Implementation Management Office and reported to the responsible officials of the State Council and relevant ministries and commissions on the implementation of major science and technology projects. A total of 4 companies participated in the project. . In the report, Zhang Zhigang was the only one of the four reporting units. The reporting time was extended from the originally scheduled 8 minutes to 15 minutes. The reason was that during the reporting process, Jinan No. 2 Machine Tool Group became the only company to receive leadership interventions. Minister Wan Gang said at the time that the current level of the company's stamping line was not simple, and it was not easy. From 12 beats per minute to 16 beats, the efficiency increased by a quarter and quality also drove the company.
Among the six major types of machine tools provided for auto companies, the stamping process equipment of Jinan No. 2 Machine Tool Group is also the only type of equipment that does not require imports. The current market share is about 80%. The large-scale rapid stamping line mentioned in the above report Shanghai GM Dongyue Automobile Co., Ltd. and Chery Automobile also completed installation and commissioning work. There is basically no machine tool product exported to foreign countries. The reason is that the technical level is not reassuring. Yu Shengmei said.
However, Dai Rongju said: When some international auto companies’ joint ventures in China are making relevant tenders, we are the only company in China that is qualified to participate in bidding. In the competition with foreign companies, they often succeed in winning the bid. The level of technology has been equal to industrial developed countries.
Dai Rongju refers to the machine tool products for automobile manufacturers. Our products mainly supply auto companies, but they basically cover different levels of demand. Dai Rongju said.
Lu Jiansheng, deputy general manager of the Jinan No. 2 Machine Tool Group, said in an interview with People's Daily that about 7 or 8 of the 10 cars currently in the market are manufactured using our equipment. The Jinan Science and Technology Bureau stated that Jinan No. 2 Machine Tool Group is currently the largest forging equipment and most comprehensive metallurgical machine tool manufacturing enterprise in China with the largest overall product category and strongest overall strength, and almost all of its own-brand automobile production. The large-scale press equipments are all from Jinan No. 2 Machine Tool Co., Ltd., including GM, Honda, Volkswagen and other joint venture brands. Most of them use the products of Jinan No. 2 Machine Tool Group. And complete exports to the United States, Canada, Germany and more than 50 countries and regions, becoming 'one of the world's three major stamping equipment manufacturers'. Jinan Science and Technology Bureau said.
There is indeed a gap between domestic high-end machine tool products and foreign advanced level, and this requires further improvement of our technical level. Dai Rongju said.
However, Dai Rongju also pointed out that after the country publishes relevant plans for the high-end equipment manufacturing industry, the company must also hope to seize market opportunities.
In the news released by the Shandong State-owned Assets Supervision and Administration Commission of the People's Republic of China, the 4000-kilo-bar automatic high-speed precision silicon steel sheet production line developed by the Jinan No. 2 Machine Tool Group has successfully passed the pre-acceptance inspection of Dongfang Group Dongfang Motor Co., Ltd. Originally, this type of product market has been monopolized by foreign companies. The orders obtained by Jinan No. 2 Machine Tool Group came from winning the same stage competition with German and Japanese companies in 2009. This product has reached a higher level in terms of machine structure, selection of parts, machine vibration and noise, and stamping efficiency. Jinan Science and Technology Bureau said.
In addition, the company also stated that the production of high-torque mechanical dual-oscillating milling head has also broken the long-term technical monopoly of the developed countries in China, and has been well applied and verified in the processing of the Three Gorges hydropower station blades.
The company’s announcement also stated that since August of this year, it has successively won a series of high-end product orders in international bidding, such as signing single-arm, two-arm feeding fast stamping with FAW-Volkswagen, Shanghai GM, and Jiangling Auto. Lines, large robot press lines, large multi-station presses and other supply contracts show the company's strong international competitiveness.
Touch Kitchen Faucets,Touch Kitchen Faucets Price,Touch Kitchen Faucets Product
Yuyao Zelin Sanitary Ware Co., Ltd , https://www.zelinfaucet.com