The production of artistic glass doors is a manifestation of beauty. It is full of a strong artistic atmosphere. Art glass doors are generally installed and then indoor. Now it not only has the function of partitioning and protecting furniture, but it also becomes an ornament that can be appreciated by people and gives them a sense of beauty. The following Xiaobian recommends several art glass door introductions and art glass door making techniques. Let's take a look.
Art glass door products recommended
Art glass door: first
Product features: In the silver foil glass decoration retains a round of the natural glass, and then carved in it, half transparent half flower, with another kind of beauty. The use of flowers and leaves in the light and shade of color is also in place, giving people a sense of three-dimensionality.
The dark gold mirror strokes and vine-like clusters of flowers are dotted with diamonds of various sizes. The Chinese and Western art scenes are full of artistic images of glass.
Product theme: mirror flower edge
Product specification: 2330*650mm (can be customized)
Reference price: 680 yuan / square meter
Art glass door: second paragraph
Product features: The background glass is decorated with sculpting techniques and silver foil to create a bare wall effect, which not only looks good, but also adds to the looming beauty. White magnolia is glittering with glittering gold foil, which not only avoids dullness, but also makes its light shine more.
Product theme: Magnolia
Product specification: 2330*650mm (can be customized)
Reference price: 700 yuan / square meter
Gold foil and silver foil are used on the glass. Under the condition of no light, the gold and silver foil will also emit a faint gold or silver light, which is more beautiful than in the light conditions. This translucent magnolia is very suitable for the screen, the price is very reasonable, like literature, sex and quiet friends can start.
Art glass door making process
1. Etching : Corrosion of the glass surface with a good acid liquid. Material: Marking paper: Carvers Marking Tape: Used to protect the cross-section of the glass from acid attack, protective film and engraving. Adhesive sealing must be tightly sealed to ensure that acidic liquid does not flow into the tape. The surface of the glass is in contact with the surface of the glass. The surface of the glass is corroded. The back of the glass is protected. The protective film: The back of the glass is protected from acid attack. The protective film is smooth and protective. There are no hard objects, sand, etc. between the contact surface of the glass to ensure that the protective film is not punctured by the blade: the button engraving machine is used to strictly draw the line buttons carved by the engraving machine. Complex lines should be in accordance with the picture or material, because the messy lines are chaotic, easy to buckle wrong, which look at the deduction which should not be deducted, so as to avoid deductions cause losses. Acid pool: The size is about 1.5 meters X 2.4 meters, rather big rather than small, to avoid if any customers want large glass can not be processed. Protective gloves and other protective labor protection tools: The protector will not be harmed by acidic liquid during operation.
Process flow: 1. Drawing and engraving; 2. Stickers buckle paper; 3. Adding protective film on the back (plus two passes, sealing twice, the insurance coefficient is high); 4. Under the acid pool; 5. Within a certain period of time (usually half an hour) Remove the glass and rinse it with clean water (with a brush). The etched pattern clearly shows the glass surface.
Second, SMD : Glass Slabs manufacturers to make a good glass patch needs materials: no shadow glue, distributors shipped (bonded glass and patch) shadowless adhesive for chemical bonding liquid by UV radiation dry, Strong adhesion. Handsheet: used to wipe shadowless plastic glass will have excess shadowless adhesive on the edge, because the surface of the emulsified glass is processed by chemical composition, the chemical substance and the emulsion surface of the shadowless glue will have a long contact time. The reaction results in the destruction of the emulsification surface, so that the emulsified surface has dirty marks and even the emulsification surface disappears. Therefore, when the glass patch is bonded, one sheet is wiped one by one, and it must be rubbed and adhered. Wash powder and brush: Cleans the remaining shadowless glue on the glass surface. After the glue is dry and the glass patch does not move, wash it with detergent powder and a small amount of water in a timely manner. Rinse with clean water. The edge of the main brush patch and the shadowless glue remain on the emulsification surface, and should be brushed in other places. Alkaline detergent will remove the shadowless glue. Brush the edge of the patch when you apply the brush to ensure that it is clean and free from secondary rework. Remover: Heat the sticky patch to remove it from the newly glued heating tool. Shadowless light: The ultraviolet killing lamp is used to irradiate the non-dry patch with ultraviolet light and make it dry.
Precautions:
1. The heating should be uniform, rather slow and not eager, uneven heating can lead to glass breakage.
2. It is easy to remove the patch when the temperature reaches 150-200 degrees.
3. After the patch on the emulsification surface is removed, it will leave traces of previous adhesion, so stick together as far as possible in the previous position to avoid loss caused by the customer's return.
4. Before the glass paste is glued and dried, be sure to clean the glass surface and the adhesive surface of the patch to ensure that there are no bubbles. Hand-patch will be no shadow adhesive to the adhesive surface of the patch, the patch lightly on the glass surface, place it, gently press with your hand, the bubble will be extruded. If the bubbles do not come out, they can be moved lightly, or they can pick up the patch and re-adhere from the new glue, but they must be timely. The shadowless glue will dry up in 5 seconds if the UV is sufficient, and it is not sufficient. It will be destroyed soon, so time must be good.
5, SMT art glass is best made of float glass, because the strength of the adhesive after bonding is quite large, the flatness of the glass surface is not enough, then it will increase the adhesive force between the glass after the glass patch and between the glass, Causes glass damage.
Process flow: 1. Look at the picture or material. Place the patch on the glass, place the patch on the glass that needs the joint and the whole patch pattern on the processed glass. 2. Prepare the toilet paper and stick it. Rubbing; 3, sticky and after all the glue after the patch is dry patch fixed immobile with detergent water brush into the cleaning.
Third, after acid etching plus crystal shell need material : all the items needed for the glass patch process. Crystal Bay art glass is the glass after the acid etching is finished, and the process glass is bonded to the glass surface with a shadowless adhesive and directly bonded to the glass surface with a crystal shell. The crystal shell is better than the patch, and the bubble is also treated well. Because the crystal shell has a small adhesive area, it still can't ignore the residue of the shadowless glue, and it must be cleaned with detergent. The flatness of the glass is also better. In addition, the disadvantage of the crystal shell is that it is not easy to remove the glue after the glue is finished, because the thickness of the crystal shell is higher than the patch, and the thickness of the crystal shell is uneven, and it is easy to burst after being heated. Cause unnecessary losses.
The above about the art glass door product recommendation and the art glass door production process are briefly introduced here, and I hope to help you. For more information, please visit this website. Stay tuned.
Glass door
Stainless Steel Baking Cooling Rack
Baking rack,baking cooling mesh,Baking cooling rack,Cooling Rack, steel wire cooling rack, etc.
Baking wire mesh is made of high quality 304 stainless steel, never rusting and durable. Cooling Wire mesh does not have any coating or chemical ingredients, making food safer.
Multi-functional Grill Cooking rack: the wire mesh is mainly used for outdoor cooking, it can also be used as a cooling and baking rack. Or you can develop other uses for it.Baking Rack,Cooling Rack,Kitchen Baking Rack,Stainless Steel Cooling Rack,Oven Baking Rack
Shenzhen Lanejoy Technology Co.,LTD , https://www.brassinsert.net