Anti-static floor As the name implies, the main feature of anti-static is that it has solved many problems for people. Static electricity is a phenomenon that we often encounter in our daily lives. For special industries, frequent static electricity activities make the safety factor of the entire work environment drop drastically. It is imperative to choose an anti-static floor for such an office environment. Today, Xiao Bian took everyone to understand the anti-static floor price list and anti-static floor construction process and acceptance criteria.
First, anti-static floor price list
1, all steel anti-static flooring Model: Ordinary specifications: 600 * 600 * 30 Price: 145.00 yuan / square
2, all-steel anti-static floor models: general specifications: 600 * 600 * 33 Price: 155.00 yuan / square
3, all-steel anti-static floor model: International CQ type specifications: 600*600*35 Market price: 245.00 yuan/square
4, all-steel anti-static floor models: International Q-type specifications: 600 * 600 * 35 Market Price: 265.00 yuan / square
5, boundless steel anti-static flooring Model: General Specifications: 600 * 600 * 35 Market Price: 245.00 yuan / square
6, boundless steel anti-static floor model: international specifications: 600 * 600 * 35 market price: 275.00 yuan / square
7, All-steel Anti-static Ventilation Floor Model: Strengthen Specification: 600*600*35 Market Price: 375.00 Yuan/Square
8, PVC anti-static flooring Model: Domestic specifications: 600 * 600 * 2 Market price: 58.00 yuan / square
Second, anti-static floor construction steps
1, grassroots processing and cleaning
The skeleton of the movable floor surface shall be supported on the cast-in-place concrete on the surface of the cement mortar floor or on the ground floor of the terrazzo building. The surface of the grass-roots floor shall be smooth, clean and free from dust, and the moisture content shall not exceed 8%. Carefully wipe clean before installation, if necessary, brush the surface of the insulating grease or varnish.
2, find in the set of squares, positioning, positioning the line
According to the plane size of the room and equipment layout, etc., choose the direction of plate laying according to the floor module of the movable floor, which has the following specific conditions:
(1) If there are no control cabinets and other equipment in the interior plane, and the plane size is in accordance with the plate module, it should be laid from the inside to the outside;
(2) If the size of the indoor plane does not conform to the module of the plate, the center lines of the two directions in the room should be found. To see how much the dimensions of the two sides differ, if the difference is not obvious from the outside to the inside; if there is a large difference, it is advisable to carry out a symmetrical check, from the inside to the outside;
(3) When the equipment such as control cabinets are to be left indoors, their laying direction and sequence should be considered comprehensively;
According to the above selection method, the work of finding, setting, dividing, and locating elastic lines will be carried out. It is necessary to draw the surface layered lines on the walls around the room (also called the panel control position control line to facilitate the construction operation control), but also to put the dividing line on the grassroots level, and to the correct size, cross the circle up and down, Form a square grid and mark the location reserved for the equipment (in this case, insert the pipeline under the raised floor, and be careful to avoid the brackets that have been marked with good marks).
3, installation of fixed adjustable brackets and tips
Firstly, the elevation control lines projected on the walls around the original room should be inspected in advance. The reference point should be determined according to the direction and sequence of the selected laying direction. Then the adjustable position should be placed at the crossing point of the grid grid. , The beam on the frame rotates the bearing screw, first adjust the height of the bearing surface to the height of the whole room with a small line and a horizontal ruler. After the steel pillar and the beam form a frame, use a spirit level to copy.
4, laying the floor of the active floor
First of all, check the cables and pipelines laid under the surface of the movable floor to ensure that the active floor is laid without any mistakes. First place the cushion strip on the crossbeam and glue it with the glue. Lay the raised floor to adjust the level to ensure that the four corners are flat and tight, and no padding method should be used. When laying the movable floor blocks not conforming to the modulus, the insufficient part can be trimmed and trimmed according to the actual size, and equipped with corresponding adjustable supports and beams. With the wall joints, should be based on the width of the gap were used to move the floor or wooden brush high-strength plastic inlays, narrow slots should use foam plastic inlay. Afterwards, check the adjustment of plate level and gap.
Fifth, wipe and wax
Clean the floor and wipe the floor.
Third, anti-static floor construction acceptance standards
1. The variety, specification and technical performance of the movable floor must meet the design requirements, comply with the construction specifications and the current national standards;
2, the floor surface is clean, no dust, relics, clear patterns, color to one, even seams, the surrounding straight straight, no cracks block, falling angle and missing defects;
3, no scratches on the floor surface, no coating off, no damage to the edge;
4. The edging material and the size of each adjacent surface layer meet the design requirements and construction specifications, and the corners are neat and smooth;
5, the edge of the floor should ensure a straight line, the dislocation of the adjacent floor is not greater than 1mm;
6. After the pavement, the whole floor should be stable and firm, and the staff should not have a swaying sensation when walking on the floor. There should be no sound;
Editor's summary: The above is Qijia Decoration Network to provide you with the anti-static floor price list and the introduction of anti-static floor, only for your reference! If you still want to learn more about anti-static floor, you can pay attention to this website decoration information channel.
Flooring Flooring Flooring Maintenance Flooring
Solvent Based Paints And Coatings
Organophilic Bentonite,Solvent Based Bentonite,Organophilic Clay Minerals,Organophilic Bentonite Clay
CHANGXING GUANGDA NEW MATERIALS CO.,LTD. , https://www.gdbentonite.com