Reasons for the uneven color of injection molded products and solutions The main reasons for the uneven color of injection molded products and their solutions are as follows:
(1) The colorant is poorly diffused, and this often causes a pattern to appear near the gate.
(2) The plastic or colorant has poor thermal stability. To stabilize the color tone of the part, it is necessary to strictly fix the production conditions, especially the material temperature, the amount of material and the production cycle.
(3) For crystalline plastics, try to make the cooling speed of each part of the parts consistent. For parts with large difference in wall thickness, coloring agent can be used to mask the chromatic aberration. For the parts with uniform wall thickness, the temperature and mold temperature should be fixed. .
(4) The shape and gate form of the part, the position has an influence on the filling condition of the plastic, so that some parts of the part have chromatic aberration and should be modified if necessary. Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Sink Siphon,Kitchen Siphon,Bathroom Sink Siphon,Sink Double Bowl Siphon
Kaiping Jenor Sanitary Ware Co., Ltd , https://www.kpjenorsanitary.com